Two Input DTP Transmitter With Audio Embedding For Floor Boxes

Video

   VGA 

      Gain 

Unity

      Bandwidth 

170 MHz (-3 dB)

      Crosstalk 

-50 dB @ 10 MHz, -30 dB @ 100 MHz

      Switching speed 

<5 ms. (max)

   HDMI 

      Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

      Maximum pixel clock 

165 MHz

      Resolution range 

Up to 1920x1200 or 1080p @ 60 Hz; 2k

      Formats 

RGB and YCbCr digital video

      Standards 

DVI 1.0, HDMI, HDCP 1.1, CEA-861E

Video input HDMI

   Number/signal type 

1 HDMI input (or single-link DVI-D with the appropriate DVI-HDMI adapters)

   Connectors 

1 female HDMI type A

Video input VGA

   Number/signal type 

1 VGA-QXGA; RGBHV

   Connectors 

1 female 15-pin HD

   Nominal level 

0.7 Vp-p for RGB

   Min./max. level 

Analog, 0.3 V to 1.5 Vp-p with no offset

   Impedance 

75 ohms

   Horizontal frequency 

15 kHz to 145 kHz

   Vertical frequency 

30 Hz to 170 Hz

   Return loss 

<-40 dB @ 5 MHz

Sync VGA

   Input type 

RGBHV

   Input level 

1.9 V to 5.0 Vp-p

   S/N 

>90 dB at maximum input (unweighted)

   Max. input voltage 

5.0 Vp-p

Interconnection between transmitter and receiver

   Number/signal type 

1 DTP 230 output

   Connector 

1 female RJ-45

   Termination standard 

TIA/EIA T568B

   Transmission distance 

Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 STP cable

      Cable requirements  

Solid conductor, 24 AWG or better

      Cable recommendations  

400 MHz bandwidth, STP (shielded twisted pair)

Audio

   Gain 

Unbalanced output: 0 dB; balanced output +6 dB

   Frequency response 

20 Hz to 20 kHz, 0.5 dB

   THD + Noise 

0.01% @ 1 kHz at nominal level

   S/N 

>90 dB, at maximum input (unweighted)

   Crosstalk 

<-45 dB @ 20 kHz, or -72 dB @ 1 kHz or below

   Stereo channel separation 

>80 dB @ 1 kHz to 20 kHz

Audio input

   Number/signal type 

1 analog stereo, unbalanced or
1 digital audio, embedded in the HDMI

   Connectors 

1 female 3.5 mm mini stereo jack
1 female HDMI Type A (shared with video input)

   Source formats 

      HDMI 

LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog 

Analog stereo audio

   Impedance 

10k ohms, DC coupled

   Nominal level 

-10 dBV

   Maximum level 

+6dBV, unbalanced

   CMRR 

>60 dB typ @ 1 kHz

   Input gain adjustment 

-18 dB to +24 dB, 1 dB steps, adjustable per input

Audio output

   Number/signal type 

1 analog audio over DTP signal, or
1 embedded digital audio over DTP signal

   Connectors 

1 RJ-45 jack

Communications switcher

   Serial control port 

RS-232 via (1) 3.5 mm, 3 pole captive screw connector

   Serial control pin configuration 

Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd

   Baud rate and protocol (RS-232) 

9600 baud, 8 data bits, 1 stop bit, no parity

   USB control port 

1 female mini USB, type B

   USB standards 

USB 2.0, high speed

   Program control 

Extron Simple Instruction Set (SISTM)

Communications RS-232/IR over TP

   Serial control pass-through port  

1 RS-232 and IR via (1) 3.5 mm, 5-pole captive screw connector

   Serial control pin configuration 

Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd

   Baud rates 

300 to 115200 baud

   Protocol 

8 or 7 data bits
1 or 2 stop bits
no parity (default)
even or odd parity

   IR pass-through control port 

TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz

   IR control pin configuration 

3 = GND, 4 = IR Tx, 5 = IR Rx

General

   Power supply 

External
Input: 100 to 240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts

   Power consumption 

      Device  

4.5 watts

      Device and power supply  

5.5 watts

      Remote power budget 

12 watts

   Ambient temperature/humidity 

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +104 F (0 to +40 C) / 10% to 90%, noncondensing

   Cooling 

Convection, no vents

   Thermal dissipation 

      Device  

15.3 BTU/hr

      Device and power supply  

18.5 BTU/hr

   Mounting

      Floor box mount 

Ackermann GB3/OBO Betterman floor box, MK Electric CableLink Plus Single Pan floor box, MK Electric CableLink Plus Modular floor box, ElectraPlan floor box, and PUK floor box mountable

   Enclosure type  

Metal

   Enclosure dimensions 

2.3" H x 2.8" W x 5.2" D*
(5.9 cm H x 7.2 cm W x 13.2 cm D)
(Dimensions exclude connectors)
* Depth is 6.1" (15.5 cm) including mounting tabs

   Product weight  

1.1 lbs (0.5 kg)

   Regulatory compliance 

CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE