Two Input 4K-60 HDMI Switcher With Integrated DTP2 Transmitter And HDMI Output

specification

   Frame rate1 

DTP2 output 24, 25, 30, 50, 60, or 120 fps
HDMI output 24, 25, 30, 50, 60, 120, 144, or 240 fps

   Chroma sampling1 

4:4:4, 4:2:2, or 4:2:0

   Color bit depth1 

8, 10, or 12 bits per color

   Signal Type 

HDMI 2.0b; HDCP 2.3

   Max. video data rate 

18 Gbps (6 Gbps per color)

Video

   Maximum data rate 

18 Gbps (6 Gbps per color)

   Maximum pixel clock  

600 MHz

   Resolution range 

Up to 2560x1600* @ 60 Hz or
UHD (3840x2160 @ 60 Hz)
with 4:4:4 chroma subsampling
*reduced blanking

   Color bit depth 

8, 10, 12 bits subject to the maximum data rate limit

   Formats  

RGB and YCbCr digital video

   Standards 

DVI 1.0; HDMI 1.4, 2.0b; HDCP 1.4, 2.3; CEA-861-F

Video input

   Number/signal type 

2 single link HDMI (or DVI-D*)

   Connectors 

2 female HDMI type A

Video output

   Connectors 

1 local HDMI output, 1 female RJ-45 output

   Horizontal frequency 

24 kHz to 135 kHz for resolutions up to 18 Gbps

   Vertical frequency 

DTP2: 24 Hz to 120 Hz for resolutions up to 18 Gbps
HDMI: 24 Hz to 240 Hz for resolutions up to 18 Gbps

   Termination standard 

TIA/EIA T568B

   Transmission distance 

Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

   Cable requirements  

Solid conductor, 24 AWG or better

   Cable recommendations  

400 MHz bandwidth, STP (shielded twisted pair)

Audio

   Gain 

Unbalanced output: 0 dB; balanced output +6 dB

   Frequency response 

20 Hz to 20 kHz, 0.5 dB

   THD + Noise 

0.03% @ 20 Hz to 20 kHz at maximum output

   S/N 

>90 dB, at maximum output (15 dBu), balanced (unweighted)

   Stereo channel separation 

>80 dB @ 1 kHz to 20 kHz

Audio input

   Number/signal type 

1 PC level stereo, unbalanced
2 Digital Embedded Audio on HDMI

   Connectors 

(1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
(2) Female HDMI

   Impedance 

>10k ohms, DC coupled

   Nominal level 

-10 dBV (316 mVrms)

   Maximum level 

+7 dBV (unbalanced)

Communications switcher

   Serial control port 

1 RS-232, 3.5 mm, 3-pole captive screw connector, rear panel

      Pin configuration 

Pin 1 = Tx, Pin 2 = Rx, Pin 3 = GND

      Baud rate and protocol 

9600 baud, 8 data bits, 1 stop bit, no parity

      Pin configuration 

Pins 1 and 2 of captive screw connector shorted together enable auto-input switching.

   USB control port 

1 female mini USB, type B, front panel

      USB standards 

USB 2.0, high speed

   Contact closure/tally output 

(1) 3.5 captive screw connector, 3-pole
(1) 3.5 captive screw connector, 4-pole

      Pin configuration 

Contact Closure - Pin 1 =Input 1 contact, Pin 1 = Input 2 contact, Pin 2 = GND
(for both captive screw)

      Pin configuration 

Tally -  Pin 3 = Input 1 tally ground, Pin 3 =  Input 2 tally ground, Pin 4 = +5V
(on Input 2 captive screw)

   Program control 

Extron Simple Instruction Set (SIS)

Communications external device (RS-232/IR over TP)

   Quantity/type 

(1) RS-232 and IR via (1) 3.5 mm 5-pole captive screw connector

   Serial control pass-through ports 

(1) Bidirectional RS-232

   Output/DTP Rx 

(1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with IR port)

   Baud rate and protocol 

300 to 115200 baud
8 or 7 data bits
1 or 2 stop bits
No parity (default), even or odd parity

   Serial control pin configurations 

Pin 1 = Tx, Pin 2 = Rx, Pin 3 = GND

   IR control pass-through ports 

(1) bidirectional TTL level (0 to 5V) modulated infrared control from 30 KHz to 60 kHz

      Output/DTP Rx 

(1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with RS-232 port)

   IR control pin configuration 

Pin 3 = GND, Pin 4 = IR Tx, Pin 5 = IR Rx

General

   Power supply 

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 2.0 A, 24 Watts

   Power consumption 

      Device  

10.1 watts

      Device and power supply  

12.5 watts

      Remote power budget 

18 watts

   Ambient temperature/humidity 

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing

   Cooling 

Convection, vents on top and sides

   Thermal dissipation 

      Device  

28.0 BTU/hr

      Device and power supply  

36.5 BTU/hr

   Mounting 

      Rack mount 

Yes, with optional rack shelf
Back of the rack mountable with optional back-of-the-rack mounting kit

      Furniture mount 

Yes, with optional under-desk mounting kit

   Enclosure type  

Metal

   Enclosure dimensions 

1.00" H x 8.75" W x 6.0" D (1 inch high, half rack wide)
(2.54 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)

   Product weight  

1.0 lb (0.453 kg)

   Regulatory compliance 

CE, c-UL, UL, C-Tick, FCC Class A, ICES, RoHs, WEEE, VCCI

   Product warranty 

3 years parts and labor

   Everlast power supply warranty 

7 years parts and labor