Power Injector for XTP and Pro Series Control Systems

Request to Call Back Send Inquiry

Product Description

Key Features

Supplies 13 watts of power to one XTP twisted pair extender, IPL Pro control processor, or TouchLink Pro touchpanel
Designed specifically for the high data rates of XTP Systems
No impact on signal quality
Patented ZipClip 200 mounting kit included:
- Mounts securely on a variety of surfaces, including rack rails, tables, lecterns, projector poles, and table legs
- Wire tie slots for proper strain relief and dressing of excess cable
- Quick release tab allows for easy installation and removal
Real-time status LEDs for troubleshooting and monitoring
UL/c-UL listed and CE compliant

General
Connectors	1 RJ-45 female connector for pass-through input 1 RJ-45 female connector for power and pass-through output
Power supply	Internal input: 100-240 VAC, 50-60 Hz
Power output	+48 VDC, 0.35 A, 16.8 watts
Ambient temperature/humidity	Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with optional 1U rack shelf with the included ZipClip 200 mounting clip or by securing to rack rails with tie wraps
Furniture mount	Yes, with the included ZipClip 200 mounting clip
Pole mount	Yes, using tie wraps
Enclosure type	High impact, high temperature plastic
Enclosure dimensions	1.7" H x 4.3" W x 4.5" D (1U high, quarter rack wide) (4.2 cm H x 11.0 cm W x 11.4 cm D)
Product weight	0.8 lb (0.4 kg)
Vibration	Operating: 10-250 Hz, 0.25 Gp-p, 3 axes, 15 min. sweep
Regulatory compliance
Safety, EMI/EMC	CE, C-tick, c-UL, UL, CISPR 22 Class B, CISPR 24, FCC Class B, NEC Class 2, KC, S-mark, GS-mark
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
Product warranty	7 years parts and labor