Modular DVI Matrix Switchers

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

Available in I/O sizes from 4x4 to 16x16 or 36x36, depending on the DMS Matrix Switcher Frame selected
Modular and field-upgradeable design
Choice of DMS DVI or Fiber Matrix I/O boards
Supports data rates to 4.95 Gbps - 1.65 Gbps per color
EDID Minder automatically manages EDID communication between connected devices
Ethernet monitoring and control

Video DMS DVI boards

Routing

From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs

Gain

Unity

Resolution range

Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz

Signal Type

Single-link DVI digital video signals are supported.

Digital video

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)

NOTE	The DMS DVI Series boards are not compatible with HDMI.

Digital audio

Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content

Consumer Electronics Control (CEC)

Not supported

EDID and DDC

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

HDCP

Not supported

HPD

Supports hot plug detection (HPD) of display as a pass-through signal.

Maximum data rate

4.95 Gbps (1.65 Gbps per color)

Maximum pixel clock

165 MHz

Standards

DVI 1.0

Switching speed

200 ns, max.

Video input DMS 44 DVI and DMS 4i DVI input boards

Number/signal type

4 digital RGB single link DVI-D per input board

Connectors

4 female DVI-I (digital only) per input board

Equalization

Automatic

Input cable length

100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.

Video output DMS 44 DVI and DMS 4o DVI output boards

Number/signal type

4 digital RGB single link DVI-D per output board

Connectors

4 female DVI-I (digital only) per output board

Re-clocking

Automatic

Output cable length

50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p

Peripheral device power

250 mA per output

Communications switcher host ports

Serial host control port

1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector

Baud rate and protocol

9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity

Serial control pin configurations

9-pin female D connector

RS-232

2 = Tx, 3 = Rx, 5 = Gnd

RS-422

2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+

USB control ports

1 front panel female mini USB B

USB standards

USB 2.0, low speed

Ethernet control port

1 RJ-45 female

Ethernet data rate (for network communication)

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet

Ethernet default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

Web server

Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory

Program control

Extron control/configuration program for Windows
Extron Simple Instruction Set (SIS)
Microsoft Internet Explorer ver. 6 or higher, Telnet

General

Power supply

Internal, 2* (positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is standard.

Power consumption

212 watts
Measured fully loaded with (9) 4x4 I/O boards

Power consumption: I/O boards

Ambient temperature/humidity

Storage: -40 to +158F (-40 to +70C) / 10% to 90%, noncondensing
Operating: +32 to +122F (0 to +50C) / 10% to 90%, noncondensing

Cooling

Fan, right to left (as viewed from front panel)

Thermal dissipation, full load

724 BTU/hr
Measured fully loaded with (9) 4x4 I/O boards

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

14.0" H x 17.0" W x 12.25" D (8U high, full rack wide)
(35.6 cm H x 43.2 cm W x 31.1 cm D)
(Depth excludes connectors and handles. Width excludes rack ears.)

Product weight with boards installed

38.5 lbs (17.5 kg)

Shipping weight with boards installed

48 lbs (22 kg)

Regulatory compliance

CE, c-UL UL,C-tick, FCC Class A, ICES, KC, VCCI,
Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor