Meeting Space Collaboration System-Decorator-Style Wallplate Switcher

Video input

   Number/signal type 

      Analog 

HCT 102 D: 1 VGA RGBHV

      Digital 

         HCT 102 D 

1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter)

         HCR 102 

1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter)

   Connectors 

      HCT 102 D 

1 female 15-pin HD
1 female HDMI type A

      HCR 102 

1 female HDMI type A

   Nominal level 

Analog: 0.7 Vp-p

   Min./max. level 

Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain

   Impedance 

Analog: 75 ohms

   Horizontal frequency 

Analog: 15 kHz to 100 kHz

   Vertical frequency 

Analog: 30 Hz to 75 Hz

   HDMI equalization 

Automatic

   HDMI input cable length 

50' (15 m) for resolutions up to 1920x1200 or 1080p @ 60 Hz; 2K, using Extron HDMI Pro Series cable

   Resolution range 

640x480 to 1600x1200 and 1920x1200*, 480p, 576p, 720p, 1080i, 1080p, and 2K
*reduced blanking

   Return loss 

<-40 dB @ 5 MHz

   DC offset (max. allowable) 

1.5 V

   Standards 

DVI 1.0, HDMI 1.4, HDCP 1.4

Sync VGA

   Input type 

RGBHV, bi-level and tri-level sync

   Input level 

1.9 V to 5.0 Vp-p

   S/N 

>90 dB at maximum input (unweighted)

   Max. input voltage 

5.0 Vp-p

Interconnection between transmitter and receiver

   Connector 

1 female RJ-45 on each unit (transmitter and receiver)

   Termination standard 

TIA/EIA T568B

   Transmission distance 

Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable with a 1080p, 60 Hz signal

      Cable requirements  

Solid conductor, 24 AWG or better

      Cable recommendations  

400 MHz bandwidth, STP (shielded twisted pair)

Video processing

   Decoder 

12 bit digital (3D-adaptive comb filter)

   Analog sampling 

12 bits per color, 170 MHz standard (RGB)

   Digital pixel data bit depth 

8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)

   Colors 

1 billion (10 bit processing)

Video output

   Number/signal type 

1 HDMI (with CEC)

   Connectors 

1 female HDMI

   HDMI peripheral device power 

250 mA

   Scaled resolution 

640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8
HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz

Audio

   Gain 

Unbalanced output: 0 dB; balanced output +6 dB

   Frequency response 

20 Hz to 20 kHz, 0.5 dB

   THD + Noise 

<0.1%, 20 Hz to 20k Hz at nominal level

   S/N 

>90 dB, at maximum input (unweighted)

   Crosstalk 

-80 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>80 dB @ 1 kHz

Audio input

   Number/signal type 

2 analog stereo, unbalanced or
2 digital audio, embedded in the HDMI signal

   Connectors 

2 female 3.5 mm mini stereo jacks; tip (L), ring (R), sleeve (ground)
2 female HDMI Type A

   Source formats 

      Analog 

Analog stereo audio

      HDMI 

LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

   Impedance 

10k ohms, DC coupled

   Nominal level 

-10 dBV, unbalanced

   Maximum level 

+6 dBV, unbalanced

   CMRR 

>60 dB typical, unbalanced, @ 1 kHz

Audio output

   Number/signal type 

1 analog, line level stereo, balanced or unbalanced (variable)
1 digital, embedded in HDMI (fixed)

   Connectors 

(1) 3.5 mm captive screw connector, 5 pole
1 female HDMI

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

0.5 dB channel to channel

   Maximum level (Hi-Z) 

>+15 dBu, balanced; >+9 dBu, unbalanced

   Output volume range 

0 to 100% in 1% steps

Communications

   Contact closure remote control 

(1) 3.5 mm, 3 pole captive screw connector

   Contact closure pin configuration 

Pin 1 = Gnd, pin 2 = input 2, pin 3 = input 3

   USB control port 

1 front panel female USB mini-B

   USB standards 

USB 2.0, high speed

   Program control 

Extron Product Configuration Software (PCS) for Windows

Communications control processor

   Memory 

      SDRAM 

512 MB

      Flash 

512 MB

   Software 

      Configuration software 

Extron Global Configurator Plus and Professional for Windows

   Ethernet control 

      Network interface controllers (NICs) 

1

      Connectors 

1 female RJ-45 connector

      Data rate 

10/100Base-T, half/full duplex with autodetect

      Protocols 

DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP

      Default settings 

Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1

   Serial control 

      Quantity/type 

1 bidirectional RS-232

      Connectors 

(1) 3.5 mm captive screw connector, 3-pole

      Baud rate and protocol 

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits;
1 (default) or 2 stop bits;
no parity (default), even, or odd parity

      Pin configuration 

Pin 1 = Tx, 2 = Rx, 3 = Gnd

   Digital I/O control 

      Quantity/type 

4 digital input/output (configurable)

      Connectors 

(1) 3.5 mm captive screw connector, 6-pole

      Digital inputs 

         Input voltage range 

0 to 24 VDC, clamped at +30 VDC

         Input impedance 

>10k ohms

         Programmable pullup 

1k ohms to +5 VDC

         Threshold low to high 

2.8 VDC

         Threshold high to low 

2.0 VDC

      Digital outputs 

250 mA sink from 24 VDC max.

      Pin configurations 

Pins 1, 2, 4, 5 = digital I/Os 1, 2, 3, 4; pins 3, 6= Gnd

   IR control 

      Quantity/type 

1 programmable TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz

      Connector 

(1) 3.5 mm captive screw connector, 2-pole

      Pin configuration 

Pin 1 = signal, 2 = Gnd

      IR output carrier frequency 

30 kHz to 300 kHz

General

   Power supply 

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 4.2 A, 50 watts

   Power consumption 

      System 

         Device  

20.5 watts

         Device and power supply  

23.0 watts

   Ambient temperature/humidity 

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +104 F (0 to +40 C) / 10% to 90%, noncondensing

   Cooling 

Convection, vents on top and sides

   Thermal dissipation 

      System 

         Device  

68.9 BTU/hour

         Device and power supply  

77.3 BTU/hour

   Mounting 

      HCT 102 D

         Rack mount 

Yes, with optional UCM R308 rack mounting panel

         Furniture or wall mount 

Yes, with 2-gang junction box or mud ring mounting bracket and the included decorator-style wallplate, or with an optional AAP 424 panel

      HCR 102

         Rack mount 

Yes, with optional 1U high rack shelf or back of the rack mounting kit

         Furniture mount 

Yes, with included, attached MBU 125 under-desk mounting brackets

   Enclosure type  

Metal

   Enclosure dimensions 

      HCT 102 D 

         Faceplate 

2.6" H x 3.2" W x 0.2" D
(66 mm H x 81 mm W x 6 mm D)
(Fits the openings in a 2-gang decorator-style wallplate)

         Device  

2.72" H x 3.48" W x 1.86" D
(69 mm H x 88 mm W x 47 mm D)
(Depth excludes connectors, height excludes mounting tabs.
Allow at least 3.0", 76 mm, depth in the wall or furniture.)

      HCR 102 

1.0" H x 8.75" W x 6.0" D (half rack wide)
(25 mm H x 222 mm W x 152 mm D)
(Depth excludes connectors.)

   Product weight  

      HCT 102 D 

0.7 lb (0.3 kg)

      HCR 102 

1.2 lbs (0.6 kg)

   Regulatory compliance 

CE**, C-tick, c-UL, FCC Class A**, ICES, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE