Matrix Blank Plate

Video input XTP CP 4i, XTP CP 4i DMA

   Number/signal type 

4 sets of proprietary twisted pair AV signals

   Connectors 

4 female RJ-45 per board

Video output XTP CP 4o

   Number/signal type 

4 sets of proprietary twisted pair AV signals

   Connectors 

4 female RJ-45 per board

Video XTP CP 4i VGA

   Gain 

Unity

   Bandwidth 

300 MHz (-3 dB), fully loaded
0-10 MHz: no more than +0.1 dB to -0.1 dB
0-130 MHz: no more than +0.8 dB to -0.8 dB

   Crosstalk 

-88 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz

   Switching speed 

200 ms (max.)

Video input XTP CP 4i VGA

   Number/signal type 

4 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video

   Connectors 

4 female 15-pin HD

   Nominal level 

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

   Minimum/maximum levels 

Analog: 0.5 V to 2.0 Vp-p with no offset

   Impedance 

75 ohms

   Return loss 

<-30 dB @ 5 MHz

   DC offset (max. allowable) 

1.5 V

Video processing XTP CP 4i VGA

   Decoder 

8 bit digital

   Digital sampling 

30 bit, 10 bits per color; 162 HMz standard

   Colors 

1 billion

Sync XTP CP 4i VGA

   Input type 

RGBHV, RGBS, RGsB, RsGsBs

   Input level 

0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

   Input impedance 

510 ohms

   Horizontal frequency 

15 kHz to 150 kHz

   Vertical frequency 

30 Hz to 150 Hz

   Max. propagation delay 

30 ns

   Max. rise/fall time 

4 ns

   Polarity 

Positive or negative

Video  XTP CP 4i DVI Pro, XTP CP 4o DVI Pro

   Gain 

Unity

   Resolution range 

Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz

   Signal type 

Single link DVI digital video signals are supported.

      Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video)

      Digital audio 

Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.

      Consumer Electronics Control (CEC) 

Not supported

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

   Maximum pixel clock 

165 MHz

   Standards 

DVI 1.0, HDMI 1.3, HDCP 1.1

   Switching speed 

200 ns, max.

Video input XTP CP 4i DVI Pro

   Number/signal type 

4 digital RGB single link DVI-D (or HDMI*)

   Connectors 

4 female DVI-I (digital only)

   Equalization 

Automatic

   Input cable length 

>100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

Video output XTP CP 4o DVI Pro

   Number/signal type 

4 digital RGB single link DVI-D (or HDMI*)

   Connectors 

4 DVI-I (digital only)

   Re-clocking 

Automatic

   Peripheral device power 

5 VDC, 250 mA per output

Video XTP CP 4i HDMI, XTP CP 4i HDMI DMA, XTP CP 4o HDMI

   Gain 

Unity

   Resolution range 

Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz

   Signal type 

Single-link HDMI (or DVI-D*)

      Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz)

      Consumer Electronics Control (CEC) 

Not supported

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

   Maximum pixel clock 

165 MHz

   Standards 

DVI 1.0, HDMI 1.3, HDCP 1.1

   Switching speed 

200 ns, max.

Video input XTP CP 4i HDMI, XTP CP 4i HDMI DMA

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Equalization 

Automatic

   Input cable length 

>100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

Video output XTP CP 4o HDMI

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Re-clocking 

Automatic

   Peripheral device power 

5 VDC, 250 mA per output

Audio input XTP CP 4i DMA, XTP CP 4i HDMI DMA

   Source formats 

PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1

Audio XTP CP 4i VGA, XTP CP 4o SA 

   Gain 

Unbalanced output: -6 dB; balanced output 0 dB

   Frequency response 

20 Hz to 20 kHz, 0.05 dB

   THD + Noise 

0.03% @ 1 kHz at nominal level

   S/N 

>90 dB at maximum output (21 dBu, unweighted) (balanced)

   Crosstalk 

<-80 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>80 dB @ 1 kHz

   CMRR 

>75 dB @ 20 Hz to 20 kHz

Audio input XTP CP 4i VGA

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Impedance 

>10k ohms unbalanced/balanced, DC coupled

   Nominal level 

0 dBu (0.775 Vrms)

   Maximum level 

+19.5 dBu, (balanced or unbalanced) at 1% THD+N

   Input gain adjustment 

-18 dB to +18 dB, adjustable per input; default = 0 dB

Audio output XTP CP 4o SA

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

0.1 dB channel to channel

   Maximum level (Hi-Z) 

>+21 dBu, balanced or unbalanced at 0.1% THD+N

   Maximum level (600 ohm) 

>+15 dBm, balanced or unbalanced at 0.1% THD+N

   Volume control range 

-98 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)

Audio XTP CP 4i DVI Pro, XTP CP 4o DVI Pro, XTP CP 4i HDMI, XTP CP 4o HDMI

   Gain 

Unbalanced output: -6 dB; balanced output 0 dB

   Frequency response 

20 Hz to 20 kHz, 0.05 dB

   THD + Noise 

0.01% @ 1 kHz at nominal level

   S/N 

>105 dB at maximum output (21 dBu, unweighted) (balanced)

   Crosstalk 

<-89 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>105 dB @ 1 kHz

   CMRR 

>83 dB @ 20 Hz to 20 kHz

Audio input XTP CP 4i DVI Pro, XTP CP 4i HDMI

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Impedance 

>10k ohms unbalanced/balanced, DC coupled

   Nominal level 

+4 dBu (1.228 Vrms)

   Maximum level 

+21 dBu, (balanced or unbalanced) at 0.01% THD+N
+19.5 dBu, (balanced or unbalanced) at 1% THD+N

   Input gain adjustment 

-18 dB to +18 dB, adjustable per input; default = 0 dB

Audio output XTP CP 4o DVI Pro, XTP CP 4o HDMI

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

0.1 dB channel to channel

   Maximum level (Hi-Z) 

>+21 dBu, balanced or unbalanced at 1% THD+N

   Maximum level (600 ohm) 

>+20 dBm, balanced or unbalanced at 1% THD+N

   Volume control range 

-75.8 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)

Control/remote switcher host ports

   Serial host control port 

1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector

   Baud rate and protocol 

9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control

   Serial control pin configurations 

      RS-232 

2 = Tx, 3 = Rx, 5 = GND

      RS-422 

2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+

   USB control port 

1 front panel female mini USB B

   USB standards 

USB 2.0, low speed

   Ethernet control port 

1 female RJ-45

   Ethernet data rate (for network communication) 

10/100Base-T, half/full duplex with autodetect

   Ethernet protocol 

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet

   Ethernet default settings 

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

   Web server 

Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory

   Program control 

Extron control/configuration program for Windows
Extron Simple Instruction Set (SIS)
Microsoft Internet Explorer ver. 6 or higher, Telnet

Control/remote external device (pass-through, unidirectional or bidirectional)

   Ethernet pass-through port 

1 female RJ-45 connector

   Ethernet data rate 

10/100Base-T, half/full duplex with autodetect

General

   Power 

Internal
Input: 100-240 VAC, 50-60 Hz

      XTP CrossPoint 1600 

Redundant power supply is optional.

      XTP CrossPoint 3200 

Redundant power supply is standard.

   Power consumption 

      XTP CrossPoint 1600 

300 watts

      XTP CrossPoint 3200 

500 watts

      Individual I/O boards 

TBD

   Temperature/humidity 

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing

   Cooling 

Fan, left to right (as viewed from front panel)

   Mounting 

      Rack mount 

Yes

   Enclosure type 

Metal

   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)

      XTP CrossPoint 1600 

8.75" H x 17.0" W x 15.0" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 38.1 cm D)

      XTP CrossPoint 3200 

17.5" H x 17.0" W x 17.5" D (10U high, full rack wide)
(44.5 cm H x 43.2 cm W x 44.5 cm D)

   Product weight with boards installed 

      XTP CrossPoint 1600 

18.1 lbs (8.3 kg)

      XTP CrossPoint 3200 

33.4 lbs (15.2 kg)

   Shipping weight with boards installed 

      XTP CrossPoint 1600 

23 lbs (11 kg)

      XTP CrossPoint 3200 

42 lbs (20 kg)

   Shipping weight of individual boards, if purchased separately 

2 lbs (1 kg)

   DIM weight 

      XTP CrossPoint 1600 

25 lbs (12 kg)

      XTP CrossPoint 3200 

44 lbs (20 kg)

   Vibration 

ISTA 1A in carton (International Safe Transit Association)

   Regulatory compliance 

      Safety 

CE, c-UL, UL

      EMI/EMC 

CE, C-tick, FCC Class A, ICES, VCCI

   MTBF 

30,000 hours

   Product warranty 

3 years parts and labor