Welcome to Our Company

Fiber Optic Receiver For HDMI USB Audio Control And 3D Sync

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

Supports KVM System Configuration and Control in a FOX3 Matrix system
Receives HDMI video, USB, stereo audio, RS-232 control, IR control, and 3D sync signals over fiber optic cabling
Supports mathematically lossless 4K video up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling over one fiber
Supports uncompressed 4K video up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling over two fibers
Supported HDMI 2.0 specification features include data rates up to 18 Gbps, Deep Color up to 12bit, and 3D
HDCP 2.3 compliant

specification

Frame rate3

24, 25, 30, 50, or 60 fps

Chroma sampling3

4:4:4, 4:2:2

Color bit depth2,3

8, 10, or 12 bits per color

Signal Type

HDMI 2.0, HDCP 2.3

Max. video data rate

18.0 Gbps

NOTE

1Supports lossless 4K video over one fiber or uncompressed 4K video over two fibers.
2Supports 12-bit color bit depth for uncompressed 4K video over two fibers. When using a FOX3 SR scaling receiver, the scaler must be in bypass mode to pass 4K video with a 12-bit color bit depth.
3Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.

NOTE	This product contains Class 1 laser. It meets the safety regulation of IEC 60825-1, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

Optical fiber interconnection between transmitter and receiver

Number/type

1 or 2 SFPs

Connectors

1, 2, or 3 LC connectors

Operating distance

Singlemode

20 km (12.4 miles) with singlemode (SM) cables

Multimode

500 m (1640 feet) with 50 m OM4 4700 MHz bandwidth laser optimized multimode cables

NOTE	The system works with OM1, OM2, and OM3 fiber at reduced distances.

NOTE	Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode, 1310 nm for singlemode

Data rate

10.0 Gbps (1 fiber) or 20.0 Gbps (2 fibers)

Transmission power

Singlemode

-5.2 dBm, minimum

Multimode

-2.8 dBm, minimum

Maximum receiver sensitivity

Singlemode

-12.6 dBm, maximum

Multimode

-11.1 dBm, maximum

Optical loss budget

Singlemode

+7.4 dB, maximum

Multimode

+8.3 dB, maximum

Video

Maximum data rate

18.0 Gbps (6.0 Gbps per color)

Maximum pixel clock

594 MHz

Resolution range

640x4808 up to 4096x21601,2,3,4,5,6,7,8,
480p7,8, 576p6, 720p3,4,5,6,7,8,9, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8,9,
2K1,2,3,4,5,6,7,8, 3840x21601,2,3,4,5,6,7,8, 4096x21601,2,3,4,5,6,7,8

123.98 Hz, 224 Hz, 325 Hz, 429.97 Hz, 530 Hz, 650 Hz, 759.94 Hz, 860 Hz, 9120 Hz

Frame rate

24, 25, 30, 50, 60, or 120 fps

Color space

4:4:4, 4:2:2

Color bit depth

8, 10, and, 12 bits per color

Standards

HDMI 2.0, HDCP 2.3

Horizontal frequency

24 kHz to 135 kHz for resolutions up to 18 Gbps

Vertical frequency

24 Hz to 120 Hz for resolutions up to 18 Gbps

Format

RGB and YCbCr digital video

Video output

Number/signal type

1 HDMI

Connectors

1 female HDMI type A

Power for active cables

1.1 W max. for the HDMI port

Audio

Gain

Unbalanced output: -6dB; balanced output: 0 dB (default)

Frequency response

20 Hz to 20 kHz, 0.5 dB

THD + Noise

<0.1% @ 20 Hz to 20 kHz at nominal level

S/N

>90 dB at maximum output (unweighted)

CMRR

65 dB @ 20 Hz to 20 kHz

Stereo channel separation

>80 dB @ 1 kHz

Bit Depth

16, 20, 24

Sampling rate

48 kHz

Audio output

Number/signal type

1 digital audio, embedded with HDMI (2-CH PCM only) output or
1 analog stereo, balanced/unbalanced

Connectors

1 female HDMI (shared with video output)
(1) 3.5 mm captive screw connector, 5 pole

Supported formats

HDMI

2 CH LPCM

Analog

Analog stereo audio

Impedance

50 ohms unbalanced, 100 ohms balanced (analog only)

Maximum level (Hi-Z)

+21 dBu balanced, +15 dBu unbalanced

Gain error

0.5 dB channel to channel

Volume control range

100% to 0% (0-100 in 1dB steps)

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Audio return input

Number/signal type

1 analog stereo, balanced/unbalanced

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Impedance

10 k ohms unbalanced, 20 k ohms balanced

Nominal level

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

+21 dBu balanced, +15 dBu unbalanced

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Communications

USB configuration port

Number/type

1 front panel mini USB B, female

Standard

Ethernet over USB

Serial host control port

Control

1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel

Pass-through

1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel

Baud rate and protocol

Control

9600 baud, 8 data bits, 1 stop bit, no parity

Pass-through

9600 to 115,200 baud

Serial control pin configuration

Captive screw: 1 = Tx, 2 = Rx, 3 = GND

IR control port

(1) 3.5 mm captive screw connector, 5 pole (connector is shared with RS-232 pass thru) TTL level (0 to 5V) modulated infrared control from 30 kHz to 56 kHz

IR control pin configuration

3 = GND, 4 = IR Tx, 5 = IR Rx

Ethernet control

Ethernet port

1 RJ-45 connector, female

Ethernet data rate

10/100/1000Base-T, half/full duplex with autodetect

Protocols

ARP, ICMP (ping), DHCP, DNS, HTTPS, SFTP, SSH, TCP/IP, UDP/IP

Default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off

Program control

Extron Product Configuration Software
Extron Simple Instruction Set (SIS)

USB extension

USB standards

USB 2.0, USB 1.1

USB data rates

Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480Mbps)

Data transfer types

Bulk, control, interrupt, and isochronous

USB device ports

FOX3 R 301

Number/signal type

(1) 2-port USB HID (No external hubs can be connected to these ports)
(1) 1-port USB 2.0

Connectors

3 USB type A, female (2 USB HID and 1 USB 2.0)

USB 2.0

Maximum built-in USB hubs

Minimum built-in USB hubs

USB HID

Maximum built-in USB hubs

Minimum built-in USB hubs

Available USB power

USB 2.0 port = 500 mA
USB HID ports = 100 mA

FOX3 R 311

Number/signal type

(1) 2-port USB HID hub (No external hubs can be connected to these ports)

Connectors

2 USB type A, female (2 USB HID)

USB HID

Maximum built-in USB hubs

Minimum built-in USB hubs

Available USB power

USB HID ports = 100 mA

NOTE	When configured endpoint to endpoint, there are 0 hubs. When configured with a FOX3 Matrix, there is 1 hub.

General

Power supply

Internal
Input: 100-240 VAC, 50-60 Hz

Power consumption

24.4 watts

Ambient temperature/humidity

Storage: -40 to +158F (-40 to +70C) / 10% to 90%, noncondensing
Operating: +32 to +122F (0 to +50C) / 10% to 90%, noncondensing

Cooling

Fan, air flows from front to rear (vented)

Thermal dissipation

71.0 BTU/hr

Mounting

Rack mount

Yes, with optional rack shelf

Furniture mount

Yes, with optional under desk mounting kit

Enclosure type

Metal

Enclosure dimensions

1.7" H x 8.75" W x 8.5" D (half rack wide)
(4.4 cm H x 22.2 cm W x 21.6 cm D)
(Depth excludes connectors.)

Product weight

2.4 lbs (1.1 kg)

Regulatory compliance

CE, c-UL, C-tick, FCC Class A, ICES, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE.

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

Enter Buying Requirement Details

+ Add Attachment

Email Id

Mobile number

Please Wait...

Other Products in 'Extron Electronics Products' category

6x4 ProDSP Digital Matrix Processor

Send Inquiry

1000x1000 Large-Scale Matrix Switcher Program

Send Inquiry

7 Inch And 10 Inch TouchLink Panels Recessed Wall Mount Kit

Send Inquiry

Fully-Configurable 10 Inch Touchpanel

Send Inquiry

SEND INQUIRY CALL ME FREE