Fiber Optic Input And Output Boards with RS-232 And IR Insertion

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

Four fiber optic inputs or outputs with RS-232 and IR insertion
Extends video, audio, bidirectional RS232 and IR, and Ethernet over one fiber optic cable
Supports computer and video resolutions up to 4K
HDCP compliant
Bidirectional RS232 and IR insertion for AV device control
Ethernet extension

Video XTP CP 4i Fiber 4K, XTP CP 4o Fiber 4K

NOTE

Extron strongly recommends compatibility testing while designing, and before installing, any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Applications Engineer for more information.

Gain

Unity

Resolution range

Up to 2560x1600 @ 60 Hz*, 1080p @ 120 Hz or
4K (4096x2160) @ 24 Hz, UHD (3840x2160) @ 30 Hz
UHD @ 60 Hz with 4:2:0 color subsampling
*reduced blanking

Signal Type

Single-link HDMI (or DVI-D or DisplayPort)

Maximum data rate

8.91 Gbps (2.97 Gbps per color)

Maximum pixel clock

300 MHz

Video formats

RGB and YCbCr digital video

Standards

Refer to XTP endpoints

Switching speed

200 ms (max.)

Audio format

Analog stereo, Dolby Digital Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos , DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio , up to 8 ch PCM,

Optical fiber interconnection

Number/signal type

4 sets of proprietary signals

Connectors

4 LC fiber connector

Operating distance

NOTE	Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Singlemode

10 km (6.2 miles) with singlemode cables

Multimode

200 m (650') with 62.5 m OM1 multimode cable
300 m (980') with 50 m OM2 multimode cable
400 m (1312') with 50 m OM3 2000 MHz bandwidth laser optimized cable multimode cable
500 m (1640') with 50 m OM4 4700 MHz bandwidth laser optimized cable multimode cable

NOTE	Multimode units are compatible with OM1 and OM2 multimode cables, but at reduced operating distances.

Nominal peak wavelength

Singlemode

1490 nm, 1550 nm, 1310 nm

Multimode

850 nm, 980 nm, 780 nm

Data rate

8.5 Gbps

Transmission power

Singlemode

-6 dBm, typical

Multimode

-5 dBm, typical

Maximum receiver sensitivity

Singlemode

-15 dBm, typical

Multimode

-13 dBm, typical

Optical loss budget

Singlemode

9 dB, maximum

Multimode

8 dB, maximum

Communications external device (pass-through, unidirectional or bidirectional)

Serial control pass-through ports

RS-232 (5 V) via (4) 3.5 mm, 5 pole captive screw connectors (uses 3 poles)
(connector is shared with IR control ports)

Baud rates

300 to 115200 baud

Protocol

5 to 8 data bits
1 or 2 stop bits
no parity (default), even or odd parity
flow control Xon, Xoff, and none

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd

IR control port

(4) 3.5 mm, captive screw connector, 5-pole (uses 3 poles)
(connector is shared with RS-232 control ports)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz

IR control pin configuration

3 = Gnd, 4 = IR Tx, 5 = IR Rx

Ethernet pass-through ports

4 female RJ-45

Ethernet data rate

10/100Base-T, full duplex with autodetect

General

Power

Supplied by XTP CrossPoint or XTP II CrossPoint enclosures

Power consumption

19 watts

Product weight