Welcome to Our Company

Digital And Analog Multi-Plane Modular Matrix Switcher

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

Choice of 2U, 3U, 4U, or 5U frames
Choose from digital, fiber optic, analog, wideband, and stereo audio matrix boards
Single point of control for up to 10 separate switching planes
Hot-swappable matrix board slots allow installation and replacement of matrix boards in three easy steps
Field re-configurable and updateable
10 presets per switching plane

Video composite video (SMX 84/88/1616 V)

Routing

SMX 84 V

8 x 4 matrix

SMX 88 V

8 x 8 matrix

SMX 1616 V

16 x 16 matrix

Gain

Unity

Bandwidth

150 MHz (-3 dB), fully loaded

Differential phase error

1.0 at 3.58 MHz and 4.43 MHz

Differential gain error

1.0% at 3.58 MHz and 4.43 MHz

Crosstalk

-60 dB @ 5 MHz

Switching speed

100 ms (max.)

Video input composite video (SMX 84/88/1616 V)

Number/signal type

8 or 16 composite video, S/PDIF digital audio (not reclocked)

Connectors

8 or 16 female BNC

Nominal level

1 Vp-p for composite video

Minimum/maximum levels

Analog: 0.1 V to 2.0 Vp-p with no offset

Impedance

75 ohms

Return loss

<-40 dB @ 5 MHz

DC offset (max. allowable)

1.0 V

Video output composite video (SMX 84/88/1616 V)

Number/signal type

4, 8, or 16 composite video, S/PDIF digital audio (not reclocked)

Connectors

4, 8, or 16 female BNC

Nominal level

1 Vp-p for composite video

Minimum/maximum levels

0.1 V to 2.0 Vp-p (follows input)

Impedance

75 ohms

Return loss

<-40 dB @ 5 MHz

DC offset

5 mV with input at 0 offset

Sync composite video (SMX 84/88/1616 V)

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Video S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

Routing

SMX 84 SV/YC

8 x 4 matrix

SMX 88 SV/YC

8 x 8 matrix

SMX 1616 SV/YC

16 x 16 matrix

Gain

Unity

Bandwidth

150 MHz (-3 dB), fully loaded

Differential phase error

1.0 at 3.58 MHz and 4.43 MHz

Differential gain error

1.0% at 3.58 MHz and 4.43 MHz

Crosstalk

-60 dB @ 5 MHz

Switching speed

100 ms (max.)

Video input S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

Number/signal type

8 or 16 S-video, composite video

Connectors

SMX 84/88/1616 SV

8 or 16 female 4-pin mini DIN

SMX 84/88/1616 YC

8 or 16 x 2 female BNC

Nominal level

1 Vp-p for Y S-video
0.3 Vp-p for C of S-video

Minimum/maximum levels

Analog: 0.1 V to 2.0 Vp-p with no offset

Impedance

75 ohms

Return loss

<-40 dB @ 5 MHz

DC offset (max. allowable)

1.0 V

Video output S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

Number/signal type

4, 8, or 16 S-video, composite video

Connectors

SMX 84/88/1616 SV

4, 8, or 16 female 4-pin mini DIN

SMX 84/88/1616 YC

4, 8, or 16 x 2 female BNC

Nominal level

1 Vp-p for Y S-video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.1 V to 2.0 Vp-p (follows input)

Impedance

75 ohms

Return loss

<-40 dB @ 5 MHz

DC offset

5 mV with input at 0 offset

Sync S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Video wideband (SMX 84/88/1616 WB)

Routing

SMX 84 WB

8 x 4 matrix

SMX 88 WB

8 x 8 matrix

SMX 1616 WB

16 x 16 matrix

Gain

Unity

Bandwidth

400 MHz (-3 dB), fully loaded

Crosstalk

8x8

-82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz

16x16

-74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz

Switching speed

200 ms (max.)

Video input wideband (SMX 84/88/1616 WB)

Number/signal type

8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)

Connectors

8 or 16 female BNC

Nominal level

0.7 Vp-p for RGB

Minimum/maximum levels

Analog: 0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Horizontal frequency

15 kHz to 150 kHz

Vertical frequency

30 Hz to 150 Hz

Return loss

<-30 dB @ 5 MHz

DC offset (max. allowable)

1.0 V

Video output wideband (SMX 84/88/1616 WB)

Number/signal type

4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)

Connectors

4, 8, or 16 female BNC

Nominal level

0.7 Vp-p for RGB

Minimum/maximum levels

0.3 V to 1.5 Vp-p (follows input)

Impedance

75 ohms

Return loss

<-30 dB @ 5 MHz

DC offset

5 mV with input at 0 offset

Switching type

Triple-Action

Sync SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC

Input type

SMX 88 SYNC, SMX 1616 SYNC

Composite sync (S)

SMX 88 H+V

Separate H and V sync

Output type (follows input)

SMX 88 SYNC, SMX 1616 SYNC

Composite sync (S)

SMX 88 H+V

Separate H and V sync

Input level

0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

Output level

AGC to TTL: 4.0 V to 5.0 V p-p, unterminated

Input impedance

510 ohms

Output impedance

75 ohms

Horizontal frequency

15 kHz to 150 kHz

Vertical frequency

30 Hz to 150 Hz

Max. propagation delay

35 ns

Max. rise/fall time

4 ns

Polarity

Positive or negative (follows input)

Video VGA (SMX 84/88/1616 VGA)

Routing

SMX 84 VGA

8 x 4 matrix

SMX 88 VGA

8 x 8 matrix

SMX 1616 VGA

16 x 16 matrix

Gain

Unity

Bandwidth

350 MHz (-3 dB), fully loaded

Crosstalk

8x8

-82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz

16x16

-74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz

Switching speed

200 ms (max.)

Video input VGA (SMX 84/88/1616 VGA)

Number/signal type

8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video

Connectors

8 or 16 female 15-pin HD

Nominal level

0.7 Vp-p for RGB

Minimum/maximum levels

Analog: 0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Horizontal frequency

15 kHz to 150 kHz

Vertical frequency

30 Hz to 150 Hz

Return loss

<-36 dB @ 5 MHz

DC offset (max. allowable)

1.0 V

Video output VGA (SMX 84/88/1616 VGA)

Number/signal type

4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video

Connectors

4, 8, or 16 female 15-pin HD

Nominal level

0.7 Vp-p for RGB

Minimum/maximum levels

0.3 V to 1.5 Vp-p (follows input)

Impedance

75 ohms

Return loss

<-36 dB @ 5 MHz

DC offset

6 mV with input at 0 offset

Switching type

Triple-Action

Sync VGA (SMX 84/88/1616 VGA)

Input type

RGBHV, RGBS, RGsB, RsGsBs

Output type

RGBHV, RGBS, RGsB, RsGsBs (follows input)

Input level

0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

Output level

AGC to TTL: 4.0 V to 5.0 V p-p, unterminated

Input impedance

510 ohms

Output impedance

75 ohms

Horizontal frequency

15 kHz to 150 kHz

Vertical frequency

30 Hz to 150 Hz

Max. propagation delay

40 ns

Max. rise/fall time

18 ns

Polarity

Positive or negative (follows input)

Digital video SMX 44/84/88/1616 SDI

Routing

SMX 44 HD SDI

4 x 4 matrix

SMX 84 HD SDI

8 x 4 matrix

SMX 88 3G-SDI

8 x 8 matrix

SMX 1616 3G-SDI

16 x 16 matrix

Gain

Unity

Maximum data rate

2.97 Gbps

Data types

8 or 10 bit

Operation standards

4x4, 8x4

SMPTE 292M, SMPTE 259M, ITU-RBT.601, ITU-RBT.1120

8x8, 16x16

SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120

Digital video input SMX 44/84/88/1616 SDI

Number/signal type

4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI

Connectors

4, 8, or 16 female BNC

Nominal level

0.80 Vp-p 10%

Impedance

75 ohms

Return loss

<-15 dB @ 1 MHz to 1.5 GHz
<-10 dB @ 1.5 GHz to 3.0 GHz

Equalization

Automatic

Input cable equalization distance

HD-SDI, 3G-SDI

Extron SHR, Belden 1694A cable

500' (152 m)

Extron HR, Belden 1505A cable

400' (122 m)

SDI

Extron SHR, Belden 1694A cable

750' (229 m)

Extron HR, Belden 1505A cable

550' (168 m)

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Digital video output SMX 44/84/88/1616 SDI

Number/signal type

4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI

Connectors

4, 8, or 16 female BNC

Nominal level

0.80 Vp-p 10%

Impedance

75 ohms

Return loss

<-15 dB @ 1 MHz to 1.5 GHz
<-10 dB @ 1.5 GHz to 3.0 GHz

DC offset

0.5 V with input at 0 offset

Re-clocking

Automatic, or use available bypass mode for nonstandard rates

Jitter

<0.2 VI

Rise/fall time (20-80%)

SDI

700 ps 100 ps

HD-SDI

250 ps 100 ps

3G-SDI

110 ps 30 ps

Video SMX 44/48/84/88 DVI

NOTE	*Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output.

Routing

SMX 44 DVI

4 x 4 matrix

SMX 48 DVI

4 x 8 matrix

SMX 84 DVI

8 x 4 matrix

SMX 88 DVI

8 x 8 matrix

Gain

Unity

Maximum data rate

4.95 Gbps (1.65 Gbps per color)

Maximum pixel clock

165 MHz

Resolution range

Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz

Signal Type

Single-link DVI digital video signals are supported.

Digital video

RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)

NOTE	These SMX DVI Series boards support TMDS data rates up to 4.95 Gbps and are not HDCP compliant.

NOTE	These SMX DVI Series boards are not compatible with HDMI 1.3.

Digital audio

Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content

Consumer Electronics Control (CEC)

Not supported

EDID and DDC

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

HDCP

Not supported

HPD

Supports hot plug detection (HPD) of display as a pass-through signal.

Standards

DVI 1.0, HDMI 1.2

Switching speed

200 ns, max.

Video input SMX 44/48/84/88 DVI

Number/signal type

4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)

Connectors

4 or 8 female DVI-I

Equalization

Automatic

Input cable length

>100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output SMX 44/48/84/88 DVI

Number/signal type

4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)

Connectors

4 or 8 female DVI-I

Re-clocking

Automatic

Peripheral device power

250 mA per output

Video SMX 44/48/84/88 DVI PRO

NOTE	*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.

Routing

SMX 44 DVI PRO

4 x 4 matrix

SMX 48 DVI PRO

4 x 8 matrix

SMX 84 DVI PRO

8 x 4 matrix

SMX 88 DVI PRO

8 x 8 matrix

Gain

Unity

Resolution range

Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz

Signal Type

Single-link DVI digital video signals are supported.

Digital video

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)

NOTE

The SMX DVI PRO Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI 1.3 specification features.

**Extron strongly recommends compatibility testing while designing, and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Application Engineer for more information.

Digital audio

Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.

Consumer Electronics Control (CEC)

Not supported

EDID and DDC

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

HDCP

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards

HPD

Supports hot plug detection (HPD) of display as a pass-through signal.

Maximum data rate

6.75 Gbps (2.25 Gbps per color)

Maximum pixel clock

165 MHz

Standards

DVI 1.0, HDMI 1.3

Switching speed

200 ns, max.

Video input SMX 44/48/84/88 DVI PRO

Number/signal type

4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)

Connectors

4 or 8 female DVI-I (digital only)

Equalization

Automatic

Input cable length

>100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output SMX 44/48/84/88 DVI PRO

Number/signal type

4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)

Connectors

4 or 8 female DVI-I (digital only)

Re-clocking

Automatic

Peripheral device power

250 mA per output

Video SMX 44/48/84/88 HDMI

NOTE	*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

Routing

SMX 44 HDMI

4 x 4 matrix

SMX 48 HDMI

4 x 8 matrix

SMX 84 HDMI

8 x 4 matrix

SMX 88 HDMI

8 x 8 matrix

Gain

Unity

Resolution range

Up to 1920x1200 or 1080p @ 60 Hz

Signal Type

Single-link HDMI (or DVI-D*)

Digital video

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)

NOTE

The SMX HDMI Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI 1.3 specification features.

Digital audio

Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.

Consumer Electronics Control (CEC)

Not supported

EDID and DDC

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

HDCP

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards

HPD

Supports hot plug detection (HPD) of display as a pass-through signal.

Maximum data rate

6.75 Gbps (2.25 Gbps per color)

Maximum pixel clock

165 MHz

Standards

DVI 1.0, HDMI 1.3

Switching speed

200 ns, max.

Video input SMX 44/48/84/88 HDMI

Number/signal type

4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)

Connectors

4 or 8 female HDMI type A

Equalization

Automatic

Input cable length

>100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output SMX 44/48/84/88 HDMI

Number/signal type

4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)

Connectors

4 or 8 female HDMI type A

Re-clocking

Automatic

Peripheral device power

250 mA per output

Optical specifications SMX 88/1616 FOX Fiber Optic I/O board

NOTE	The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825.

Number/type

8 or 16 singlemode, or 8 or 16 multimode fiber optic inputs and outputs per I/O board

NOTE	Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.

Connectors

16 or 32 LC connectors per I/O board

Operating distance

Singlemode

30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode distribution amplifier or Tx/Rx unit

Multimode

300 m (985') with 62.5 m multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
1 km (3280') with 50 m multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
2 km (6561') with 50 m 2000 MHz bandwidth laser multimode cable with an Extron multimode distribution amplifier or Tx/Rx unit

NOTE	Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM), 1310 nm for singlemode (SM)

Transmission power

Singlemode

-5 dBm, typical

Multimode

-5 dBm, typical

Optical loss budget

Singlemode

12 dB, maximum

Multimode

7 dB, maximum

Maximum channel data rate

4.25 Gbps

Video SMX 88/1616 FOX

Routing

8 x 8 or 16 x 16 unidirectional (Tx) matrix or
4 x 4 or 8 x 8 bidirectional (Tx/Rx) matrix

Gain

Unity

Pixel data bit depth

8 bits per channel, 3 channels (R, G, B)

Video/audio input SMX 88/1616 FOX

Number/signal type

8 or 16 fiber optic signals

Connectors

8 or 16 LC connectors per I/O board

NOTE	Input comes from an Extron fiber optic transmitter or fiber optic distribution amplifier.

Video/audio output SMX 88/1616 FOX

Number/signal type

8 or 16 fiber optic signals

Connectors

8 or 16 LC connectors per I/O board

NOTE	Output connects to an Extron fiber optic receiver.

USB SMX 44/84 USB

USB specification

USB 2.0 compatible

USB data rates

Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)

USB input SMX 44/84 USB

Connectors

4 or 8 female USB type B

USB output SMX 44/84 USB

Connectors

8 female USB type A

Audio SMX 84/88/1616A (analog)

Routing

SMX 84 A

8 x 4 stereo matrix

SMX 88 A

8 x 8 stereo matrix

SMX 1616 A

16 x 16 stereo matrix

Gain

Unbalanced output: -6 dB; balanced output 0 dB

Frequency response

20 Hz to 20 kHz, 0.05 dB

THD + Noise

0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level

S/N

>102 dB at maximum output (21 dBu, unweighted) (balanced)

Crosstalk

<-95 dB @ 1 kHz, fully loaded

Stereo channel separation

>98 dB @ 1 kHz

CMRR

>70 dB @ 20 Hz to 20 kHz

Audio input SMX 84/88/1616 A (analog)

Number/signal type

8 or 16 stereo, balanced/unbalanced

Connectors

(8 or 16) 3.5 mm captive screw connector, 5 pole

Impedance

>10k ohms unbalanced/balanced, DC coupled

Nominal level

0 dBu (0.775 Vrms)

Maximum level

+19.5 dBu, (balanced or unbalanced) at 1% THD+N

Input gain adjustment

18 dB to +24 dB, adjustable per input; default = 0 dB

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Audio output SMX 84/88/1616 A (analog)

Number/signal type

4, 8, or 16 stereo, balanced/unbalanced

Connectors

(8 or 16) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

0.1 dB channel to channel

Maximum level (Hi-Z)

>+21 dBu, balanced or unbalanced at 0.1% THD+N

Maximum level (600 ohm)

>+15 dBm, balanced or unbalanced at 0.1% THD+N

Volume control range

-76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)

NOTE	Attenuation = volume number minus 64. The default is 0 dB = volume number 64.

Control/remote switcher host ports

Serial host control port

1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232 front panel 2.5 mm mini stereo jack

Baud rate and protocol

9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity

Serial control pin configurations

9-pin female D connector

RS-232

2 = Tx, 3 = Rx, 5 = Gnd

RS-422

2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+

Mini stereo jack

RS-232

Tip = Tx, ring = Rx, sleeve = Gnd

Ethernet control port

1 female RJ-45

Ethernet data rate (for network communication)

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet

Ethernet default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

Web server

Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory

Program control

Extron control/configuration program for Windows
Extron Simple Instruction Set (SIS)
Microsoft Internet Explorer ver. 6 or higher, Telnet

General

Power supply

Internal, with or without redundant power supply
Input: 100-240 VAC, 50-60 Hz

Power consumption

15.0 to 180 watts, depending on configuration

Ambient temperature/humidity

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing

Cooling

Fan, left to right (as viewed from front panel)

Thermal dissipation, full load

50 to 620 BTU/hr, depending on configuration

Mounting

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)

SMX 200 Frame

3.5" H x 17.0" W x 12.0" D (2U high, full rack wide)
(8.9 cm H x 43.1 cm W x 30.5 cm D)

SMX 300 Frame

5.25" H x 17.0" W x 12" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)

SMX 400 Frame

7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(17.8 cm H x 43.2 cm W x 30.5 cm D)

SMX 500 Frame

8.75" H x 17.0" W x 12" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 30.5 cm D)

Product weight with boards installed

SMX 200 Frame

16.2 lbs (7.3 kg)

SMX 300 Frame

18.1 lbs (8.2 kg)

SMX 400 Frame

20.3 lbs (9.2 kg)

SMX 500 Frame

23.9 lbs (10.8 kg)

Shipping weight with boards installed

SMX 200 Frame

20 lbs (10 kg)

SMX 300 Frame

22 lbs (10 kg)

SMX 400 Frame

26 lbs (12 kg)

SMX 500 Frame

30 lbs (14 kg)

Shipping weight of individual boards, if purchased separately

SMX 88 FOX

2 lbs (1 kg)

SMX 1616 FOX

3 lbs (2 kg)

DIM weight

SMX 400 Frame

30 lbs (14 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, KCC, VCCI

Product warranty

3 years parts and labor

Enter Buying Requirement Details

+ Add Attachment

Email Id

Mobile number

Please Wait...

Other Products in 'Extron Electronics Products' category

4K-60 HDMI DTP3 Transmitter with Input Loop-Through

Send Inquiry

1G Fiber Pro AV Over IP Encoder - HDMI Ethernet And USB

Send Inquiry

15 Inch Tabletop TouchLink Pro Touchpanel

Send Inquiry

High Power Injector For XTP And Pro Series Control Systems

Send Inquiry

SEND INQUIRY CALL ME FREE