Control Processor

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

Supports TouchLink Pro touchpanels, eBUS button panels, and Network Button Panels
Supports secure industry standard communications protocols
Supports LinkLicense
One bidirectional RS-232 serial port with software handshaking
One bidirectional RS-232/RS-422/RS-485 serial port with hardware and software handshaking
One IR/Serial port for one-way control of external devices

Memory

SDRAM

512 MB

Flash

4.5 GB

Software

Configuration software

Global Configurator Plus and Professional

Programming software

Global Scripter

Control apps

Extron Control

Resource management software

GlobalViewer Enterprise

Utilities

Toolbelt, embedded web page

Hardware user interface

Hardware

TouchLink Pro touchpanels, NBP button panels, or eBUS button panels

Ethernet

Network interface controllers (NICs)

Connector

1 female RJ-45 connector

Data rate

10/100/1000Base-T, half/full duplex with autodetect

Protocols

DHCP, DNS, HTTP (redirect), HTTPS, ICMP, IEEE 802.1X , NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP

Default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS = 127.0.0.1

Serial

Quantity/type

1 bidirectional RS-232, RS-422, RS-485 (port 1)
1 bidirectional RS-232 (port 2)

Connector

(1) 3.5 mm captive screw connector, 5 pole
(1) 3.5 mm captive screw connectors, 3 pole

Baud rate and protocol

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity

NOTE

The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.

Pin configurations

Serial, 5-pole captive screw

RS-232 (default)

Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS

RS-422

Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+

RS-485

Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+

Serial, 3-pole captive screw

Pin 1 = Tx, 2 = Rx, 3 = Gnd

Digital I/O

Quantity/type

4 digital input/output (configurable)

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Digital inputs

Input voltage range

0 to 24 VDC, clamped at +30 VDC

Input impedance

>10k ohms

Programmable pullup

1k ohms to +5 VDC

Threshold low to high

2.8 VDC

Threshold high to low

2.0 VDC

Digital outputs

250 mA sink from 24 VDC max.

Pin configurations

1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd

IR/serial

Quantity/type

1 programmable: unidirectional RS-232 (5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz

Connector

(1) 3.5 mm captive screw connector, 2-pole

Baud rate and protocol (RS-232)

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity

Pin configurations

For each port, pin 1 = signal, 2 = Gnd

IR output carrier frequency

30 kHz to 300 kHz

IR learning carrier frequency

30 kHz to 300 kHz

IR learning capture distance

2" (5.1 cm) to 12" (30.5 cm) from the front panel

Relay

Quantity/type

2 normally open relays

Connector

(1) 3.5 mm captive screw connector, 3 pole

Relay control contact rating

24 VDC, 1 A

Volume control

Quantity/type

1 volume control (compatible with select Extron amplifiers)

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Pin configuration

Pin 3 = 10 VDC reference voltage input, pin 4 = 0 to +10 VDC control voltage output, pin 5 = Gnd

Control voltage output range

0 to +10 VDC (0.2 volts), adjustable

eBUS

eBUS control ports

(1) 3.5 mm captive screw connector, 5 pole (uses 4 poles)

eBUS pin configuration

+V = +12 VDC; +S = + signal; -S = - signal; G = ground

Recommended cable type

Extron STP20-2/1000 or STP20-2P/1000 cable

Maximum system cable length

1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details.

eBUS power output

6 watts

General

Power supply

External, included
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts

Power input requirements

12 VDC, 1 A, 12 watts, max.

Power consumption

Device

8.8 watts, 12 VDC
3.4 watts without eBUS

Device and power supply

11.0 watts, 100-240 VAC, 50-60 Hz
4.6 watts, 100-240 VAC, 50-60 Hz without eBUS

Ambient temperature/humidity

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing

Cooling

Convection, no vents

Thermal dissipation

Device

9.5 BTU/ hr
11.5 BTU/hr without eBUS

Device and power supply

16.8 BTU/hr
15.6 BTU/hr without eBUS

Mounting

Rack mount

Yes, with optional 1U rack shelf

Furniture mount

Yes, with optional bracket kit

Enclosure type

Metal

Enclosure dimensions

1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(43 mm H x 109 mm W x 152 mm D)
(Depth excludes connectors.)

Product weight

0.7 lbs (0.3 kg)

Regulatory compliance

CE, C-Tick, c-UL, FCC Class A, ICES, KC, UL, UL Listed for use in plenum air handling spaces, VCCI
Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor