Welcome to Our Company

8x8 to 24x24 Modular Fiber Optic Matrix Switcher

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

LinkLicense for KVM System Configuration and Control package
I/O sizes from 8x8 to 24x24
Switches 4K/60 video, audio, USB, control, and 3D sync over fiber optic cable
Compatible with all Extron FOX3 Series transmitters and receivers
Dante audio network interface, DMP expansion port, and analog audio inputs and outputs
RS-232 insertion from the Ethernet control port

Frame rate3

24, 25, 30, 50, or 60 fps

Chroma sampling3

4:4:4, 4:2:2

Color bit depth2,3

8, 10, or 12 bits per color

Signal Type

HDMI 2.0, HDCP 2.3

Max. video data rate

18.0 Gbps

NOTE

1Supports lossless 4K video over one fiber or uncompressed 4K video over two fibers.
2Supports 12-bit color bit depth for uncompressed 4K video over two fibers. When using a FOX3 SR scaling receiver, the scaler must be in bypass mode to pass 4K video with a 12-bit color bit depth.
3Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.

NOTE	This product contains Class 1 laser. It meets the safety regulation of IEC 60825-1, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

Optical specifications

Number/type

8 singlemode or 8 multimode SFPs per board

Connectors

16 LC connectors per I/O board

Signal Type

8 to 320 fiber optic signals

Routing

8 x 8 up to 320 x 320 unidirectional matrix or
4 x 4 up to 160 x 160 bidirectional matrix

Operating distance

Singlemode

20 km (12.4 miles) with singlemode (SM) cables

Multimode

500 m (1640 feet) with 50 m OM4 4700 MHz bandwidth laser optimized multimode cables

NOTE	The system works with OM1, OM2, and OM3 fiber at reduced distances.

NOTE	Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM), 1310 nm for singlemode (SM)

Transmission power

Singlemode

-5.2 dBm, typical

Multimode

-2.8 dBm, typical

Receiver sensitivity

Singlemode

-12.6 dBm, typical

Multimode

-11.1 dBm, typical

Optical loss budget

Singlemode

+7.4 dB, maximum

Multimode

+8.3 dB, maximum

Maximum channel data rate

10 Gbps

Audio input/output board

Number/signal type

4 analog stereo inputs, balanced/unbalanced
4 analog stereo outputs, balanced/unbalanced

Connectors

(8) 3.5 mm captive screw connector, 5 pole

Source formats

2 channel LPCM

Impedance

10 k ohms unbalanced, 20 k ohms balanced

Nominal level

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

+21 dBu balanced, +15 dBu unbalanced

Gain range

Adjustable, -18 dB to +24 dB, 1 dB steps

Gain

Unbalanced output: -6 dB; balanced output 0 dB (default)

Frequency response

20 Hz to 20 kHz, 0.5 dB

THD + Noise

<0.1% @ 20 Hz to 20 kHz at nominal level

S/N

>90 dB at maximum output (unweighted)

CMRR

65 dB @ 20 Hz to 20 kHz

Output impedance

50 ohms unbalanced, 100 ohms balanced (analog only)

Maximum level (Hi-Z)

+21 dBu balanced, +15 dBu unbalanced

Gain error

0.5 dB channel to channel

Volume control range

-100 dB to 0 dB (control 0-100 in 1 dB steps)

Crosstalk

-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

Bit Depth

16, 20, 24

Sampling rate

48 kHz

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

AT ports Dante audio transport

Transmission type

Dante/AES-67, software selectable

Connectors

2 RJ-45 to Dante interface

Inputs

Up to 32 stereo channels

Outputs

Up to 32 stereo channels

Audio format

24 bit uncompressed at 48 kHz sampling rate

Latency

Deterministic, based on user selections: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms

EXP port

Transmission type

Proprietary

Connector

1 RJ-45

Inputs

8 stereo channels Rx

Outputs

8 stereo channels Tx

Audio format

Uncompressed, 24-bit, 48 kHz

EXP cable

Shielded CAT6 up to 10 meters

Communications

USB configuration port

Number/type

1 front panel mini USB B, female

Standard

Ethernet over USB

Serial control port

1 RS-232, 3.5 mm captive screw connector, 3-pole, female, rear panel

Baud rate and protocol

300 to 115200 baud (default: 9600), 8 data bits, 1 stop bit, no parity

Serial control pin configuration

Captive screw: 1 = Tx, 2 = Rx, 3 = GND

Ethernet control

Ethernet port

1 RJ-45 connector, female

Ethernet data rate

10/100/1000Base-T, half/full duplex with autodetect

Protocols

ARP, ICMP (Ping), DHCP, DNS, HTTPS, SFTP, SSH, TCP/IP, UDP/IP

Default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off

Web server

Up to 200 simultaneous sessions
7.0 MB non-volatile memory

Program control

Extron Product Configuration Software
Extron Simple Instruction Set (SIS)

USB host ports

Number/signal type

1-port USB HID
1-port USB 2.0

Connectors

0 (Virtual USB)

USB 2.0

Maximum built-in USB hubs

Minimum built-in USB hubs

USB HID

Maximum built-in USB hubs

Minimum built-in USB hubs

General

Power supply

Internal (IEC 60320 C20 inlet)
North America:
Input: 120 VAC, 50-60 Hz, 20A
Input: 240 VAC, 50-60 Hz, 15A

Other regions:
Input: 100-120 VAC, 50-60 Hz, minimum 15A
Input: 200-240 VAC, 50-60 Hz, minimum 7A
A redundant power supply is standard.

Redundant power supply is standard

Power consumption

Enclosure without boards: 178 watts
Enclosure fully loaded with 40 MM boards: 1001 watts
Enclosure fully loaded with 40 SM boards: 1165 watts
Each MM board: 20.1 watts
Each SM board: 23.1 watts

Ambient temperature/humidity

Storage: -40 to +158F (-40 to +70C) / 10% to 90%, noncondensing
Operating: +32 to +122F (0 to +50C) / 10% to 90%, noncondensing

Cooling

Fan, right to left (as viewed from front panel)

Thermal dissipation, full load

MM: 3416 BTU/hr
SM: 3977 BTU/hr

Mounting

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

21.0" H x 17.0" W x 20.0" D (12U high, full rack wide)
(53.3 cm H x 43.2 cm W x 50.8 cm D)
(Depth excludes connectors and handles. Width excludes rack ears.)

Product weight (fully loaded)

126 lbs (57 kg)

Regulatory compliance

CE, c-UL, C-tick, FCC Class A, ICES, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE.

Product warranty

3 years parts and labor