Welcome to Our Company

8x2 Seamless 4K Scaling Presentation Matrix Switcher

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

Allinone 8x2 4K matrix switcher, scaler, audio DSP with AEC, audio power amplifier, and control processor
Two DTP inputs and six HDMI inputs
Two independently scaled DTP outputs
Selectable scaled DTP output rates from 640x480 to 4K
Available with integrated IPCP Pro 355MQ xi control processor
Available with energy efficient Class D stereo or mono amplifier:
2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms
1 x 100 watts @ 70 volts

Video

Routing

DTP CrossPoint 108 4K

10 x 8 matrix

DTP CrossPoint 86 4K

8 x 6 matrix

DTP CrossPoint 84 4K

8 x 4 matrix

DTP CrossPoint 82 4K

8 x 2 matrix

Maximum data rate

10.2 Gbps (3.4 Gbps per color)

Maximum pixel clock

300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling)

Resolution

Up to 2560x1600* @ 60 Hz or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling**
(* reduced blanking)
(** supported only at non-scaled HDMI outputs)

Formats

RGB and YCbCr digital video

Standards

DVI 1.0, HDMI 1.4, HDCP 1.4, CEA-861E

Video input

Number/signal type

DTP CrossPoint 108 4K

6 HDMI digital video (HDCP compliant)
4 DTP or XTP (configurable)

DTP CrossPoint 86 4K

6 HDMI digital video (HDCP compliant)
2 DTP or XTP (configurable)

DTP CrossPoint 84 4K

6 HDMI digital video (HDCP compliant)
2 DTP or XTP (configurable)

DTP CrossPoint 82 4K

6 HDMI digital video (HDCP compliant)
2 DTP or XTP (configurable)

Connectors

DTP CrossPoint 108 4K

6 female HDMI type A
4 female RJ-45

DTP CrossPoint 86 4K

6 female HDMI type A
2 female RJ-45

DTP CrossPoint 84 4K

6 female HDMI type A
2 female RJ-45

DTP CrossPoint 82 4K

6 female HDMI type A
2 female RJ-45

Matrix video outputs (non scaled)

Number/signal type

DTP CrossPoint 108 4K

4 HDMI digital video (HDCP compliant)

DTP CrossPoint 86 4K

2 HDMI digital video (HDCP compliant)

DTP CrossPoint 84 4K

2 HDMI digital video (HDCP compliant)

DTP CrossPoint 82 4K

Connectors

DTP CrossPoint 108 4K

4 female HDMI

DTP CrossPoint 86 4K

2 female HDMI

DTP CrossPoint 84 4K

2 female HDMI

DTP CrossPoint 82 4K

Video output power for active cables (HDMI pin 18)

6.6 W total power for all HDMI ports, 1.1 W per HDMI port max

Scaled TP outputs

Number/signal type

DTP CrossPoint 108 4K

4 DTP, XTP, or HDBaseT (configurable)
2 buffered HDMI digital video (HDCP compliant)

DTP CrossPoint 86 4K

4 DTP, XTP, or HDBaseT (configurable)
2 buffered HDMI digital video (HDCP compliant)

DTP CrossPoint 84 4K

2 DTP, XTP, or HDBaseT (configurable)
2 buffered HDMI digital video (HDCP compliant)

DTP CrossPoint 82 4K

2 DTP, XTP, or HDBaseT (configurable)
2 buffered HDMI digital video (HDCP compliant)

Connectors

DTP CrossPoint 108 4K

4 female RJ-45
2 female HDMI

DTP CrossPoint 86 4K

4 female RJ-45
2 female HDMI

DTP CrossPoint 84 4K

2 female RJ-45
2 female HDMI

DTP CrossPoint 82 4K

2 female RJ-45
2 female HDMI

Video processing

Digital pixel data bit depth

8, 10, or 12 bits per channel; 300 MHz pixel clock (HDMI)

Colors

1.07 billion (10-bit processing)

Video input

Horizontal frequency

15 kHz to 100 kHz

Vertical frequency

24 Hz to 75 Hz

Resolution range

640x480 to 1600x1200 and 1920x1200* 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K through 4K @ 30Hz
*reduced blanking

Scaled resolutions

640x4808, 800x6008, 852x4808, 1024x7688, 1024x8528, 1024x10248,1280x7688, 1280x8008, 1280x10248, 1360x7658, 1360x7688, 1365x7688, 1366x7688, 1365x10248, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008

HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8,, 1920x21601,2,3,4,5,6,7,8, 1920x24002,3,5,8, 2048x12008, 2048x15368, 2048x21601,2,3,4,5,6,7,8, 2048x24002,3,5,8, 2560x10808, 2560x14408, 2560x16008, 3840x21601,2,3,4,5, 3840x24005, 4096x21601,2,3,4,5

1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz,
6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz

Logos

Number

16 logos

Resolution range

Up to 4096x2160

Image file formats

BMP, JPG, PNG, TIFF

Logo effects

Transparency, RGB key, level key, alpha key

Shielded twisted pair interconnection

Connectors

Female RJ-45

Termination standard

TIA/EIA T568B

Signal transmission distance

Resolutions up to 1920x1200 and 1080p

DTP 330

Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable

DTP 230

Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 TP cable

2560x1600* and 4K @ 30 Hz (*reduced blanking)

DTP 330

Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable

DTP 230

Up to 130' (40 m) using shielded twisted pair cable or XTP DTP 24 TP cable

Cable requirements

Solid conductor, 24 AWG or better

Cable recommendations

400 MHz bandwidth, STP (shielded twisted pair)

NOTE	Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

NOTE	Input and output mode signaling: DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power XTP: HDMI with embedded audio plus RS-232 and IR HDBT: HDMI with embedded audio plus RS-232 and IR

Audio system (mic/line input to line output)

Gain

Unbalanced output: -6 dB; balanced output: 0 dB

Frequency response

20 Hz to 20 kHz, 0.2 dB

Input impedance

>10k ohms unbalanced, >20k ohms balanced

THD + Noise

0.02% at 1 kHz nominal level

S/N

105 dB at maximum balanced output (unweighted)

Crosstalk

<-90 dB @ 20 Hz to 20 kHz, fully loaded

Stereo channel separation

>80 dB @ 20 Hz to 20 kHz

Digital conversion

24-bit, 48 kHz

Audio

Routing

DTP CrossPoint 108 4K

10 x 8 stereo switching matrix
4 x 4 microphone mixing matrix

DTP CrossPoint 86 4K

8 x 6 stereo switching matrix
4 x 4 microphone mixing matrix

DTP CrossPoint 84 4K

8 x 4 stereo switching matrix
4 x 4 microphone mixing matrix

DTP CrossPoint 82 4K

8 x 2 stereo switching matrix
4 x 4 microphone mixing matrix

Supported formats Pass through

HDMI connectors

LPCM up to 7.1/24-bit/192kHz, Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

Analog conectors

Analog stereo audio

DTP connectors

De-embedded from HDMI [PCM only] or remote balanced/unbalanced analog

Audio input

Number/signal type

DTP CrossPoint 108 4K

6 stereo, analog line level, balanced or unbalanced
6 stereo, de-embedded from HDMI (PCM only)
4 DTP (de-embedded from HDMI [PCM only] and remote balanced/unbalanced analog), or XTP (embedded digital)

DTP CrossPoint 86 4K

6 stereo, analog line level, balanced or unbalanced
6 stereo, de-embedded from HDMI (PCM only)
2 DTP (de-embedded from HDMI [PCM only] and remote balanced/unbalanced analog), or XTP (embedded digital)

DTP CrossPoint 84 4K

DTP CrossPoint 82 4K

Connectors

DTP CrossPoint 108 4K

(6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs
6 female HDMI type A
4 female RJ-45

DTP CrossPoint 86 4K

(6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs
6 female HDMI type A
2 female RJ-45

DTP CrossPoint 84 4K

(6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs
6 female HDMI type A
2 female RJ-45

DTP CrossPoint 82 4K

(6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs
6 female HDMI type A
2 female RJ-45

Analog audio

Nominal level

+4 dBu, -10 dBV adjustable via input gain

Maximum level

+21 dBu balanced, +15 dBu unbalanced

Input gain adjustment

-18 dB to +24 dB, 0.1 dB steps, adjustable per input

NOTE	Unbalanced analog inputs at a DTP Tx input have +12 dB of gain applied to bring the signal to a nominal level for balanced operation.

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Mic/line input

Number/signal type

4 mono, mic/line, balanced/unbalanced (with phantom power)

Connectors

(4) 3.5 mm captive screw connectors, 3-pole

Impedance

10k ohms unbalanced, 20k ohms balanced

Nominal level

-60 dBV, +4 dBu, -10 dBV, adjustable via input gain

Maximum level

>+21 dBu at rated THD+N when mic gain is set to 0 dB

Equivalent input noise

<-120 dBV (1.0 Vrms) at +40 dB input gain

CMRR

>70 dB typical

Input gain adjustment

-18 dB to +80 dB, in 0.1 dB steps, adjustable per input

Microphone volume range

-100 dB to +12 dB

DC phantom power

+48 VDC, 10% (inputs 1-4) switched on or off

Audio output

Number/signal type

DTP CrossPoint 108 4K

6 HDMI embedded
4 DTP (embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), or HDBaseT (embedded digital)
4 stereo balanced/unbalanced analog (variable)
1 SPDIF

DTP CrossPoint 86 4K

4 HDMI embedded
4 DTP (embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), or HDBaseT (embedded digital)
4 stereo balanced/unbalanced analog (variable)
1 SPDIF

DTP CrossPoint 84 4K

4 HDMI embedded
2 DTP (embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), or HDBaseT (embedded digital)
4 stereo balanced/unbalanced analog (variable)
1 SPDIF

DTP CrossPoint 82 4K

2 HDMI embedded
2 DTP (embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), or HDBaseT (embedded digital)
2 stereo balanced/unbalanced analog (variable)
1 SPDIF

Connectors

DTP CrossPoint 108 4K

6 female HDMI
4 RJ-45
(4) 3.5 mm captive screw, 5-pole
1 RCA

DTP CrossPoint 86 4K

4 female HDMI
4 RJ-45
(4) 3.5 mm captive screw, 5-pole
1 RCA

DTP CrossPoint 84 4K

4 female HDMI
2 RJ-45
(4) 3.5 mm captive screw, 5-pole
1 RCA

DTP CrossPoint 82 4K

2 female HDMI
2 RJ-45
(2) 3.5 mm captive screw, 5-pole
1 RCA

Impedance

Stereo audio

50 ohms unbalanced, 100 ohms balanced

S/PDIF

75 ohms

Gain error

0.1 dB channel to channel

Maximum level (Hi-Z)

>+21 dBu, balanced or +15 dBu unbalanced

Output volume range

0 to -100 dB in 0.1 dB steps

EXP port

Transmission type

Proprietary

Connectors

1 RJ-45

Inputs

16 channels Rx

Outputs

16 channels Tx

Audio format

24 bit, 48 kHz sampling, uncompressed

EXP cable

Shielded CAT 6 up to 10 meters

Audio output power amplifier (DTP CrossPoint 4K IPCP SA and DTP CrossPoint 4K IPCP MA models)

Number/signal type

SA models

1 stereo or mono (2 channels total)

MA models

1 mono, 70 V

Connector

NOTE	This connector accepts wires of 22 AWG to 12 AWG.

SA models

(1) 5 mm screw lock captive screw connector, 4-pole

MA models

(1) 5 mm screw lock captive screw connector, 2-pole

Load impedance

SA models

4 ohms minimum

MA models

50 ohms minimum

High pass filter (MA models)

80 Hz, 12 dB/octave roll off

Amplifier type

Class D

Output power

SA models

25 watts (rms) per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts per channel, 4 ohms, 1 kHz, 0.1% THD

MA models

100 watts (rms) @ 70 V, 1 kHz, 0.1% THD

Protection

Clip limiting, thermal, short circuit, DC output

Frequency response

SA models

20 Hz to 20 kHz, +1/3 dB @ 1 watt

MA models

80 Hz to 20 kHz, +1/3 dB @ 1 watt

THD + Noise

<0.1%, 1 kHz, 3 dB below clipping

S/N

>90 dB, 20 Hz to 20 kHz, unweighted

Communications switcher

Serial control port

1 bidirectional RS-232, 3.5 mm captive screw connector, 3-pole (rear panel)

Baud rate and protocol

9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity (default)

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd

USB control port

1 front panel female USB mini-B

USB standards

USB 2.0, low speed

Ethernet control port

1 female RJ-45 connector

Ethernet data rate

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

DHCP, DNS, HTTP, HTTPS, IEEE 802.1X, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP, ARP, Telnet

Ethernet default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

Web server

Up to 200 simultaneous sessions
40.0 MB nonvolatile user memory

Program control

Extron control/configuration program for Windows
Extron Simple Instruction Set (SIS)
Microsoft Internet Explorer, Telnet

Communications external device (pass-through, unidirectional or bidirectional) (RS-232/IR over TP)

NOTE

Protocol is mirrored between the connected TP endpoints and the "Over TP" ports on the DTP CrossPoint switcher. Signals from a control device pass into each DTP CrossPoint switcher "Over TP" port, are embedded with the TP signal, and sent to individual TP Tx or Rx endpoints for control of remote sink or source devices.
The "Over TP" ports are simply pass-through connections to TP endpoints. There is no IR insertion from any DTP CrossPoint switcher control port to the Over TP ports. RS-232 can be inserted from the Ethernet connection.

Serial control pass-through ports

DTP CrossPoint switcher input/TP Tx

RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports)

DTP CrossPoint switcher output/TP Rx

RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports)

Baud rates

300 to 115200 baud

Protocol

8 or 7 data bits
1 or 2 stop bits
no parity (default), even, odd, mark, or space parity

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd

IR pass-through control ports

TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz

DTP CrossPoint switcher input/TP Tx

(2) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports)

DTP CrossPoint switcher output/TP Rx

(2) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports)

IR control pin configuration

3 = Gnd, 4 = IR Tx, 5 = IR Rx

Control Processor DTP CrossPoint 4K IPCP Models

Memory

SDRAM

IPCP models

512 MB

IPCP Q models

2 GB

Flash

IPCP models

4.5 GB

IPCP Q models

8 GB

Software and control options

Software

Extron Global Configurator Plus and Professional for Windows

Control options

GlobalViewer, TouchLink for Web, TouchLink for iPad, or TouchLink Pro touchpanels

Ethernet control

Network interface controllers (NICs)

Network switch

1 unmanaged 3 port switch

Connectors

3 female RJ-45 connectors

Data rate

10/100/1000Base-T, half/full duplex with autodetect

Protocols

DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP

Default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1

Serial control

Quantity/type

1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)

Connectors

(1) 3.5 mm captive screw connector, 5-pole
(2) 3.5 mm captive screw connectors, 3-pole

Baud rate and protocol

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space parity

NOTE	The 5-pole ports support both hardware and software flow control. The 3-pole ports support software flow control. The default for both types of ports is no flow control.

Pin configurations, serial, 5-pole captive screw

RS-232 (default)

Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS

RS-422

Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+

RS-485

Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+

Pin configurations, serial, 3-pole captive screw

Pin 1 = Tx, 2 = Rx, 3 = Gnd

Digital I/O control

Quantity/type

4 digital input/output (configurable)

Connectors

(1) 3.5 mm captive screw connector, 5-pole

Digital inputs

Input voltage range

0 to 24 VDC, clamped a +30 VDC

Input impedance

29k ohms

Programmable pullup

1k ohms to +5 VDC

Threshold low to high

>2.8 VDC

Threshold high to low

<2.0 VDC

Digital outputs

250 mA sink from 24 VDC max.

Pin configuration

1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd

IR/serial control

Quantity/type

2 programmable: unidirectional RS-232 (5 V), TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz

Connector

(1) 3.5 mm captive screw connector, 5-pole

Baud rate and protocol (RS-232)

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
No parity (default), even, odd, mark, or space parity

Pin configuration

For each post, pin 1 = signal, 2 = Gnd

IR output carrier frequency

30 kHz to 300 kHz

Relay control

Quantity/type

4 normanlly open relays

Relay control connectors

(1) 204 mm captive screw, 6-pole

Relay control contact rating

24 VDC, 1 A

General

Power supply

Internal
Input: 100-240 VAC, 50-60 Hz

Power consumption

DTP CrossPoint 108 4K MA

184 watts

DTP CrossPoint 108 4K SA

179 watts

DTP CrossPoint 108 4K (non-IPCP)

154 watts

DTP CrossPoint 86 4K MA

148 watts

DTP CrossPoint 86 4K SA

147 watts

DTP CrossPoint 86 4K (non-IPCP)

119 watts

DTP CrossPoint 84 4K MA

136 watts

DTP CrossPoint 84 4K SA

136 watts

DTP CrossPoint 84 4K (non-IPCP)

101 watts

DTP CrossPoint 82 4K MA

125 watts

DTP CrossPoint 82 4K SA

124 watts

DTP CrossPoint 82 4K (non-IPCP)

91.2 watts

Remote power capability

DTP CrossPoint 108 4K

Supports up to eight endpoints (four DTP Tx, four DTP Rx)
(Remote power not available in XTP and HDBaseT modes)

DTP CrossPoint 86 4K

Supports up to six endpoints (two DTP Tx, four DTP Rx)
(Remote power not available in XTP and HDBaseT modes)

DTP CrossPoint 84 4K

Supports up to four endpoints (two DTP Tx, two DTP Rx)
(Remote power not available in XTP and HDBaseT modes)

DTP CrossPoint 82 4K

Supports up to four endpoints (two DTP Tx, two DTP Rx)
(Remote power not available in XTP and HDBaseT modes)

Ambient temperature/humidity

Storage: -40 to +158 F (-40 to +70 C)/10% to 90%, noncondensing
Operating: +32 to +122 F (0 to +50 C)/10% to 90%, noncondensing

Cooling

Fans, air flows from right to left (as viewed from front panel)

Thermal dissipation

DTP CrossPoint 108 4K MA

499 BTU/hr

DTP CrossPoint 108 4K SA

486 BTU/hr

DTP CrossPoint 108 4K (non-IPCP)

440 BTU/hr

DTP CrossPoint 86 4K MA

375 BTU/hr

DTP CrossPoint 86 4K SA

376 BTU/hr

DTP CrossPoint 86 4K (non-IPCP)

321 BTU/hr

DTP CrossPoint 84 4K MA

356 BTU/hr

DTP CrossPoint 84 4K SA

355 BTU/hr

DTP CrossPoint 84 4K (non-IPCP)

279 BTU/hr

DTP CrossPoint 82 4K MA

319 BTU/hr

DTP CrossPoint 82 4K SA

315 BTU/hr

DTP CrossPoint 82 4K (non-IPCP)

248 BTU/hr

Mounting

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

DTP CrossPoint 108 4K, DTP CrossPoint 86 4K

5.25" H x 17.4" W x 16" D (3U high, full rack wide)
(13.3 cm H x 44.2 cm W x 40.6 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)

DTP CrossPoint 84 4K, DTP CrossPoint 82 4K

3.5" H x 17.4" W x 15.3" D (2U high, full rack wide)
(8.9 cm H x 44.2 cm W x 38.9 cm D)
(Depth exludes connectors and knobs. Width excludes rack ears.)

Product weight

DTP CrossPoint 108 4K, DTP CrossPoint 86 4K

17 lbs (7.7 kg)

DTP CrossPoint 84 4K, DTP CrossPoint 82 4K

14 lbs (6.4 kg)

Regulatory compliance

CE, C-tick, c-UL, FCC Class A, ICES, UL, KC, VCCI
Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor