Video XTP II CP 4i HD 8K, XTP II CP 4o HD 8K, XTP II CP 4o HD AT 8K | |||
| |||
| |||
| |||
Gain | Unity | ||
Resolution range | Up to 8K (7680x4320) @ 60 Hz, 5K (5120x2880) @ 60 Hz, | ||
Signal Type | Single-link HDMI (or DVI-D*) | ||
Digital video | RGB digital video or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 7680x4320 @ 60 Hz) | ||
EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. | ||
HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards | ||
HPD | Supports hot plug detection (HPD) of display as a pass-through signal. | ||
Maximum data rate | 40.1 Gbps | ||
Maximum pixel clock | 1190 MHz | ||
Standards | DVI 1.0, HDMI 2.1, HDCP 2.3 | ||
Video format | HDMI and DVI | ||
HDR | HDR10, HDR10+, and Dolby Vision | ||
Video input XTP II CP 4i HD 8K, XTP II CP 4o HD 8K | |||
Number/signal type | 4 HDMI 2.1 links | ||
Connectors | 4 female HDMI type A | ||
Equalization | Automatic | ||
| |||
Horizontal frequency | 15 kHz to 270 kHz for resolutions up to 40.1 Gbps | ||
Vertical frequency | 24 Hz to 240 Hz for resolutions up to 40.1 Gbps | ||
Peripheral device power | 12 VDC, 125 mA per input | ||
Connectors | (4) 3.5 mm captive screw connectors, 2-pole | ||
Video output XTP II CP 4o HD 8K, XTP II CP 4o HD AT 8K | |||
Number/signal type | 4 HDMI 2.1 links | ||
Connectors | 4 female HDMI type A | ||
Re-clocking | Automatic | ||
Peripheral device power | 5 VDC, 250 mA per output | ||
Audio input XTP II CP 4i HD 8K | |||
Number/signal type | 4 analog stereo, balanced/unbalanced or | ||
Connectors | (4) 3.5 mm captive screw connector, 5-pole | ||
Supported formats Pass through | |||
HDMI Connector | LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital Plus, Dolby Digital 5.1, | ||
Analog connector | Analog stereo audio | ||
Impedance | >10k ohms unbalanced/balanced, DC coupled | ||
Nominal level | +4 dBu (1.228 Vrms) | ||
Maximum level | +21 dBu balanced, +15 dBu unbalanced | ||
Input gain adjustment | -18 dB to +18 dB, adjustable per input; default = 0 dB | ||
Audio output XTP II CP 4o HD 8K | |||
Number/signal type | 4 analog stereo, balanced/unbalanced | ||
Connectors | (4) 3.5 mm captive screw connector, 5-pole | ||
Supported formats Pass through | |||
HDMI Connector | LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital Plus, Dolby Digital 5.1, | ||
Analog connector | Analog stereo | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Gain error | 0.1 dB channel to channel | ||
Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 1% THD+N | ||
Maximum level (600 ohm) | >+20 dBm, balanced or unbalanced at 1% THD+N | ||
Volume control range | -64 dB to 0 dB (volume numbers 0 through 64) in 1 dB increments from steps 0 to 64; default = 64 (0 dB) | ||
| |||
AT ports audio transport (XTP II CP 4o HD AT 8K only) | |||
Transmission type | Dante/AES-67, software selectable | ||
Connectors | (2) RJ-45 to Dante interface | ||
Outputs | Up to 8 channels (4 stereo channels) | ||
Audio format | Uncompressed, 24-bit, 48 kHz | ||
Latency | Deterministic, based on user selection: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms | ||
General | |||
Power | Supplied by XTP CrossPoint or XTP II CrossPoint enclosure | ||
Power consumption | |||
XTP II CP 4i HD 8K | 20 watts | ||
XTP II CP 4o HD 8K | 14 watts | ||
XTP II CP 4o HD AT 8K | 15 watts | ||
Product weight | 2.10 lbs (0.95 kg) | ||
Regulatory compliance | UL, FCC Class A | ||
Product warranty | 3 years parts and labor |