4K-60 HDMI Input and Output Boards

Video XTP II CP 4i HD 4K PLUS,  XTP II CP 4i HD DMA 4K PLUS,  XTP II CP 4o HD 4K PLUS,  XTP II CP 4o HD AT 4K PLUS

   Gain 

Unity

   Resolution range 

Up to 1080p @ 240 Hz or 4K @ 60 Hz (4:4:4 color subsampling)

   Signal type 

Single-link HDMI (or DVI-D*)

      Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 4096x2160 @ 60 Hz)

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

18 Gbps (6 Gbps per color)

   Maximum pixel clock 

600 MHz

   Standards 

DVI 1.0, HDMI 2.0b, HDCP 2.3

   Video format 

HDMI and DVI

      HDR 

HDR10, HDR10+, and Dolby Vision

Video input XTP II CP 4i HD 4K PLUS, XTP II CP 4i HD DMA 4K PLUS

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Equalization 

Automatic

   Input cable length 

Up to 25 (7.62m) at 3840x2160 and 4096x2160 @ 60 Hz 4:4:4 8 bits

   Horizontal frequency 

15 kHz to 270 kHz for resolutions up to 18 Gbps

   Vertical frequency 

24 Hz to 240 Hz for resolutions up to 18 Gbps

Video output XTP II CP 4o HD 4K PLUS, XTP II CP 4o HD AT 4K PLUS

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Re-clocking 

Automatic

   Peripheral device power 

5 VDC, 250 mA per output

Audio input XTP II CP 4i HD 4K PLUS, XTP II CP 4i HD DMA 4K PLUS

   Number/signal type 

4 analog stereo, balanced/unbalanced or
4 digital audio, de-embedded from HDMI

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole
4 female HDMI type A (shared with video input)

   Supported formats Pass through 

      HDMI Connector 

LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital Plus, Dolby Digital 5.1,
Dolby Digital 2.0 Surround, Dolby Digital 2.0, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS-X, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2-Channel

      Analog connector 

Analog stereo audio

   Impedance 

>10k ohms unbalanced/balanced, DC coupled

   Nominal level 

+4 dBu (1.228 Vrms)

   Maximum level 

+21 dBu balanced, +15 dBu unbalanced

   Input gain adjustment 

-18 dB to +18 dB, adjustable per input; default = 0 dB

Audio output XTP II CP 4o HD 4K PLUS

   Number/signal type 

4 stereo, balanced/unbalanced
4 digital audio, embedded with HDMI

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole
4 female HDMI type A (shared with video output)

   Supported formats Pass through 

      HDMI Connector 

LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital Plus, Dolby Digital 5.1,
Dolby Digital 2.0 Surround, Dolby Digital 2.0, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS-X, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2-Channel

      Analog connector 

Analog stereo audio

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

0.1 dB channel to channel

   Maximum level (Hi-Z) 

>+21 dBu, balanced or unbalanced at 1% THD+N

   Maximum level (600 ohm) 

>+20 dBm, balanced or unbalanced at 1% THD+N

   Volume control range 

-64 dB to 0 dB (volume numbers 0 through 64) in 1 dB increments from steps 0 to 64; default = 64 (0 dB)

AT ports audio transport (XTP II CP 4o HD AT 4K PLUS only)

   Transmission type 

Dante/AES-67, software selectable

   Connectors 

(2) RJ-45 to Dante interface

   Outputs 

Up to 8 channels (4 stereo channels)

   Audio format 

Uncompressed, 24-bit, 48 kHz

   Latency 

Deterministic, based on user selection: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms

General

   Power 

Supplied by XTP CrossPoint or XTP II CrossPoint enclosure

   Power consumption 

      XTP II CP 4i HD 4K PLUS  

18 watts

      XTP II CP 4i HD DMA 4K PLUS 

20 watts

      XTP II CP 4o HD 4K PLUS  

14 watts

      XTP II CP 4o HD AT 4K PLUS 

14 watts

   Product weight 

2.0 lbs (0.9 kg)

   Regulatory compliance 

UL, FCC Class A
Complies with the appropriate requirements of RoHS, WEEE

   Product warranty 

3 years parts and labor