4K-60 HDMI DTP3 Receiver with Audio De-Embedding

specification

   Frame rate1 

24, 25, 30, 50, or 60 fps

   Chroma sampling1 

4:4:4, 4:2:2, or 4:2:0

   Color bit depth1 

8, 10, 12 bits per color

   Signal Type 

HDMI 2.0b, HDCP 2.3

   Max. video data rate 

18 Gbps (6 Gbps per color)

Video

   Maximum data rate 

18 Gbps (6 Gbps per color)

   Maximum pixel clock  

600 MHz

   Resolution range 

Up to 1080p @ 120 Hz or 4K @ 60 Hz (4:4:4 subsampling)
5120x1080* @ 30 Hz, 5120x1440* @ 30Hz, 5120x2160 @ 30 Hz,
5120x2560* @ 30 Hz, 5120x2880* @ 30 Hz

   Horizontal Frequency Range 

15 kHz to 270 kHz for resolutions up to 18 Gbps

   Vertical frequency range 

24 Hz to 240 Hz for resolutions up to 18 Gbps

   Color bit depth 

8, 10, or 12 bits subject to the maximum data rate limit

   Formats  

RGB and YCbCr digital video

   HDR 

HDR10, HDR10+, Dolby Vision

   Standard 

DVI 1.0, HDMI 2.0b, HDCP 1.x, HDCP 2.3

Video Input

   Number/signal type 

      HDMI input 

1 HDMI (or single link DVI-D, with appropriate DVI-HDMI adapters)

   Connector 

      HDMI input 

1 female HDMI type A

Video Output

   Number/signal type 

1 single link HDMI or DVI-D* (Loop through)
1 DTP3 (Output)

   Connectors 

1 female HDMI (loop through)
1 female RJ-45

Interconnection Between Transmitter and Receiver

   Connector 

1 female RJ-45 per unit

   Termination standard 

TIA/EIA T568B

   Signal Transmission Distance (using XTP DTP 24 cable) 

      1080p @ 60 Hz 

Up to 330' (100 m) using shielded twisted pair STP or XTP DTP 24 cable

      4K/UHD @ 30 Hz 

Up to 330' (100 m) using shielded twisted pair STP or XTP DTP 24 cable

      4K/UHD@ 60 Hz (1) 

Up to 150' (45 m) using shielded twisted pair STP or XTP DTP 24 cable
Using 1 coupler with 3' (0.9 m) to 9' (2.7 m) patch cable
Using 2 couplers with two 3' (0.9 m) (max) patch cables (each patch cable cannot
exceed 3')
Using two punch downs with two 3' (0.9 m) to 9' (2.7 m) patch cables

      4K/UHD@ 60 Hz (2) 

Up to 175' (53 m) using shielded twisted pair STP or XTP DTP 24 cable with no couplers

      Cable requirements  

Solid conductor, 24 AWG or better

      Cable recommendations  

400 MHz bandwidth, STP (shielded twisted pair)

   Signal Transmission Distance (using XTP DTP 22 cable) 

      1080p @ 60 Hz 

Up to 330' (100 m) using  XTP DTP 22 cable

      4K @ 30 Hz 

Up to 330' (100 m) using  XTP DTP 22 cable

      4K/UHD@ 60 Hz (1), (2) 

Up to 330' (100 m) using XTP DTP 22 cable
Using 1 coupler with 3' (0.9 m) to 16' (4.9 m) patch cable
Using 2 couplers with 4' (1.2 m) (max) patch cables (each patch cable cannot
exceed 4')
Using two punch downs with 3' (0.9 m) to 8' (2.4 m) patch cables

      Cable requirements  

Solid conductor, 22 AWG or better

      Cable recommendations  

500 MHz bandwidth, STP (shielded twisted pair)

Communications

   Control/Remote Transmitter 

      USB control port 

1 front panel, female USB type C

      USB standards 

USB 2.0, low speed

      Program control 

Extron Simple Instruction Set (SISTM)
Extron Product Configuration Software (PCS)

   Control/Remote External Device (RS-232 Over TP) 

      Serial control pass-through ports 

1 RS-232, 3.5, mm 3-pole captive screw connector

      Baud rate and protocol 

300 to 115200 baud

      Protocol 

8 or 7 data bits
1 or 2 stop bits
No parity (default), even or odd parity

      Serial control pin configuration 

1 = Tx, 2 = Rx, 3 = Gnd

General

   Power supply 

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 2 A, 24 watts

   Power consumption 

      Device 

7.16 watts

      Device and power supply  

8.10 watts

      Remote power budget 

18.0 watts

   Ambient temperature/humidity 

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing

   Cooling 

Convection, vents on top and sides

   Thermal dissipation 

      Device 

23.49 BTU/hr

      Device and power supply  

26.71 BTU/hr

   Mounting

      Rack mount 

Optional 1U high rack shelf

      Furniture mount 

Optional under-desk mount kit

   Enclosure type  

Metal

   Enclosure dimensions 

1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(25 mm H x 109 mm W x 152 mm D)
(Depth excludes connectors.)

   Product weight 

TBD lbs (TBD kg)

   Regulatory compliance 

CE, c-UL, UL, C-tick, FCC Class A, ICES, VCCI
Complies with appropriate requirements of RoHS, WEEE

   Product warranty 

3 years parts and labor

   Everlast power supply warranty 

7 years parts and labor