4K-60 HDMI DTP2 Transmitter With Audio Embedding

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Key Features

Transmits HDMI plus control and analog audio up to 330 feet (100 meters) over a shielded CATx cable
Supports computer and video resolutions up to 4K/60 @ 4:4:4
Analog stereo audio embedding
Supported HDMI 2.0 specification features include data rates up to 18 Gbps, 3D, HD lossless audio formats, and CEC pass-through
Remote power capability with DTP2 products
Accepts additional analog stereo audio signals

specification

Frame rate1

24, 25, 30, 50, or 60 fps

Chroma sampling1

4:4:4

Color bit depth1

8 bits per color

Signal Type

HDMI 1.4, 2.0b; HDCP 1.4, 2.3

Max. video data rate

18 Gbps (6 Gbps per color)

NOTE	1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.

Video

NOTE

Extron strongly recommends compatibility testing while designing, and before installing, any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Applications Engineer for more information.

Maximum data rate

18 Gbps (6 Gbps per color)

Maximum pixel clock

600 MHz

Resolution range

2560x1600 @ 60 Hz or 1080p @ 60 Hz,
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
UHD (3840x2160) @ 60 Hz

Color bit depth

8 bits subject to the maximum data rate limit

Formats

RGB digital video

Standards

DVI 1.0; HDMI 1.4, 2.0b; HDCP 1.4, 2.3, CEA-861-F

Video input

Number/signal type

1 single link HDMI (or DVI-D*)

Connectors

1 female HDMI type A

Horizontal frequency

15 kHz to 150 kHz

Vertical frequency

24 Hz to 120 Hz for resolutions up to 18 Gbps

NOTE	*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

Interconnection between transmitter and receiver

Connectors

1 female RJ-45 per unit

Termination standard

TIA/EIA T568B

Signal transmission distance

Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

Cable requirements

Solid conductor, 24 AWG or better

Cable recommendations

400 MHz bandwidth, STP (shielded twisted pair)

NOTE	Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

Audio

Gain

Unbalanced output: 0 dBu; balanced output +6 dBu

Frequency response

20 Hz to 20 kHz, 0.5 dB

THD + Noise

0.03% @ 20 Hz to 20 kHz at maximum output

S/N

>90 dB, at maximum output (15 dBu), balanced (unweighted)

Stereo channel separation

>80 dB @ 1 kHz to 20 kHz

Audio input

Number/signal type

1 PC level stereo, unbalanced
1 Digital Embedded Audio on HDMI

NOTE	Analog audio can be configured for embedding onto the digital video signal at the Transmitter. Embedded digital audio can be (configured) de-embedded from the digital video signal at the Receiver end.

Connectors

(1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
(1) Female HDMI

Impedance

>10k ohms, DC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+7 dBV (unbalanced)

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Communication external device (pass-through, unidirectional or bidirectional)

Serial control port input/output

RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (5 V) (connector is shared with IR control port)

Serial control port output/input

1 set of proprietary signals on a female RJ-45 jack

Baud rate and protocol

300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd

IR control port

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz

IR control pin configuration

3 = Gnd, 4 = IR Tx, 5 = IR Rx

General

Power supply

External (included with Tx)
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 Watts

Power consumption

Device

4.9 watts

Device and power supply

6.3 watts

Remote power budget

18 watts

NOTE	Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.

NOTE	DTP2 devices can only send power to other DTP2 devices. DO NOT send power to DTP devices or they will be damaged.

Ambient temperature/humidity

Storage: -40 to +158F (-40 to +70C) / 10% to 90%, noncondensing
Operating: +32 to +122F (0 to +50C) / 10% to 90%, noncondensing

Cooling

Convection, vents

Thermal dissipation

Device

16.4 BTU/HR

Device and power supply

21.2 BTU/HR

Mounting

Rack mount

Yes, with optional 1U high rack shelf

Furniture mount

Yes, with optional under-desk mounting kit

Enclosure type

Metal

Enclosure dimensions

1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)

Product weight

0.562 lb (0.255 kg)

Regulatory compliance

CE, C-Tick, FCC Class A, ICES, VCCI, KCC, c-UL, RoHS, UL
UL rated for use in plenum airspaces: meets UL for heat and smoke release, excluding the power supply.

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor