Welcome to Our Company
1G Pro AV over IP Encoder with DTP Input

1G Pro AV over IP Encoder with DTP Input

Product Details:

X

Product Description

Key Features
  • New Expanded AES67 capabilities enable any NAV encoder or decoder to transmit or receive an AES67 audio stream
  • New Confidence Preview available in the endpoint or NAVigator browser interface
  • Works with over 40 wallplate and floor box DTP transmitters available in a variety of architectural form factors. DisplayPort, DVI and HDMI inputs available in MK, EU, and decorator-style packages
  • Converts, encodes, and streams video and audio signals from DTP transmitters over 1 Gbps Ethernet networks
  • Supports HDMI 2.0 at resolutions up to 4K/30 @ 4:4:4
  • PURE3 Codec


specification

Frame rate1

24, 25, 30, 50, or 60 fps

Chroma sampling1

4:4:4, 4:2:2, or 4:2:0

Color bit depth1

8 bits per color

Signal Type

DVI v1.0, HDMI v1.4, HDCP v1.4 and v2.3

Max. video data rate

10.2 Gbps (3.4 Gbps per color)

NOTE

1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.




Video input and loop through

NOTE

*Appropriate DVI-D to HDMI or DisplayPort to HDMI cables or adapters are required for DVI or DisplayPort signal loop-through.



Number/signal type

1 DTP
1 digital HDMI video (loop through)

Connectors

1 female RJ-45 (input)
1 female HDMI type A (loop through)

Resolution range

Up to 2560x1600* @ 60 Hz or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(* reduced blanking)

Standards

DVI v1.0, HDMI v1.4, HDCP v1.4/v2.3


Video processing

Digital sampling

8 or 10 bits per color; 300 MHz pixel clock maximum

Compression

PURE3

Bit rate

250 Mbps to 900 Mbps

Latency

<1 frame (encode/decode)**

NOTE

**Indicates minimum end-to-end latency. Network and video processing dependencies may apply.




Video output stream

Number/signal type

1 PURE3 digital video over IP

Connector

1 RJ-45 connector


Audio

Gain


Analog to analog

Unbalanced output: -12.5 dBu, balanced output: -6.5 dBu

HDMI to analog

Unbalanced output: -11.3 dBu, balanced output: -5.3 dBu

Frequency response

20 Hz to 20 kHz, +0.5 dB

THD + Noise

<0.1% @ 20 Hz to 20 kHz at nominal level

S/N

Analog to Digital: >90dB, at Full scale output, unweighted
Digital to Analog: >90dB, at Maximum balanced output, unweighted
Analog to Analog: >90dB, at Maximum balanced output, unweighted

Crosstalk

<-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

Sampling Rates

32, 44.1, 48 kHz

Bit depths

16, 20, 24 bit


Audio input

Number/signal type

1 DTP (de-embedded HDMI - PCM only or remote unbalanced analog)

Connectors

1 RJ-45 female (shared with video input)

Supported formats

LPCM (2 channel), analog stereo audio

Impedance

>10k ohms unbalanced, >20k ohms balanced

Nominal level

+4 dBu, -10 dBV configurable

Maximum level

+21 dBu balanced, +15 dBu unbalanced

Gain adjustment range

Adjustable, -18 dB to +10 dB

NOTE

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu




Audio output stream

Number/signal type

1 audio over IP LPCM
1 audio over IP AES67*

Connector

1 RJ-45 connector

NOTE

*AES67 specifications are compatible with the Extron DSPs.




Network interconnection (NAV)

Connector type

1 RJ-45

Ethernet standards

1GbE (802.3ab), 10/100/1000 Base-T, half/full duplex with autodetect

Termination

Auto-MDIX, TIA/EIA T568B

Protocols


Streaming

SRTP (AES-128) on video and audio

Transport

Multicast UDP

All supported

DHCP, HTTPS, IGMPv2/v3, IPv4, PTPv2, QoS, SSH, TCP, UDP

Security

AES-256, 802.1X, Active Directory authentication

Signal transmission distance

330' (100 m) using CAT 5e/6/6a/7 cables


Communications - external devices

Serial


Quantity/type

1 bidirectional RS-232

Connector

1 RJ-45 DTP pass-through SPD port (shared with IR and CEC)

Baud rates

300 to 115200 baud (9600 = default)

Protocol

8 (default) or 7 data bits
1 (default) or 2 stop bit
no parity (default), even or odd parity

IR control


Quantity/type

1 unidirectional infrared

Connector

1 RJ-45 DTP pass-through SPD port (shared with RS-232 and CEC)

IR output carrier frequency

30 kHz to 60 kHz

USB configuration port


Quantity/type

1 front panel USB mini-B

Standard

Ethernet over USB


General

Power supply

Internal
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 4.0A, 48 watts

Power consumption


Device and power supply

35.13 watts

Ambient temperature/humidity

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +104 F (0 to +40 C) / 10% to 85%, noncondensing

Cooling

Fan, air flows from front to rear

Thermal dissipation


Device and power supply

110.0 BTU/hour

Mounting


Rack mount

Yes, with optional rack shelf

Furniture mount

Yes, with optional under desk mounting kit

Enclosure type

Metal

Enclosure

1.66" H x 8.75" W x 10.5" D (half rack wide)
(42 mm H x 222 mm W x 267 mm D)

Product weight

2.85 lbs (1.3 kg)

Regulatory compliance

CE, c-UL UL,C-tick, FCC Class A, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor


Enter Buying Requirement Details
Email Id
Mobile number


Back to top