16x16 to 320x320 Modular Fiber Optic Matrix Switcher

Optical specifications

   Number/type 

16 singlemode or 16 multimode fiber optic inputs and outputs (16 Tx and 16 Rx) per I/O board

   Connectors 

32 LC connectors per I/O board

   Operating distance 

      Singlemode 

30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode transmitter/receiver

      Multimode 

300 m (985') with 62.5 m OM1 multimode (MM) cables with an Extron multimode Tx/Rx unit
1 km (3280') with 50 m OM2 multimode (MM) cables with an Extron multimode Tx/Rx unit
2 km (6561') with 50 m, OM3/OM4, 2000 MHz bandwidth, laser-optimized multimode (MM) cables with an Extron multimode Tx/Rx unit

   Nominal peak wavelength 

850 nm for multimode (MM), 1310 nm for singlemode (SM)

   Transmission power 

      Singlemode 

-5 dBm, typical

      Multimode 

-5 dBm, typical

   Maximum receiver sensitivity 

      Singlemode 

-18 dBm, typical

      Multimode 

-12 dBm, typical

   Optical loss budget 

      Singlemode 

13 dB, maximum

      Multimode 

7 dB, maximum

   Maximum channel data rate 

4.25 Gbps

Video

   Routing 

16 x 16 up to 320 x 320 unidirectional (Tx) matrix or
8 x 8 up to 160 x 160 bidirectional (Tx/Rx) matrix

   Gain 

Unity

   Pixel data bit depth 

8 bits per channel, 3 channels (R, G, B)

Video/audio input or output

   Number/signal type 

16 to 320 fiber optic signals

   Connectors 

16 LC connectors per I/O board

   Re-clocking 

2.125 Gbps, 4.25 Gbps, bypass, or automatic (SM P boards only)

Digital video SDI/HD-SDI/3G-SDI (FOX 320x Series with FOX I/O HD-SDI)

   Routing 

      FOX I/O 1616 HD-SDI 

16 x 16 up to 320 x 320 matrix

   Gain 

Unity

   Maximum data rate 

2.97 Gbps

   Auto data rate lock 

Yes

   Data types 

8 or 10 bit

   Operation standards 

SMPTE 292M, SMPTE 259M, SMPTE 297-2006, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120

Digital video input SDI/HD-SDI/3G-SDI (FOX 320x Series with FOX I/O HD-SDI)

   Number/signal type 

16 single link SDI, HD-SDI, or 3G-SDI; or 8 dual link HD-SDI per board

   Connectors 

16 female BNC per board

   Nominal level 

0.80 Vp-p 10%

   Impedance 

75 ohms

   Return loss 

>13 dB @ 1 MHz to 1.3 GHz

   Equalization 

Automatic

   Input cable equalization distance with FOX I/O 1616 HD-SDI boards 

      3G-SDI 

         Extron RG6, Belden 1694A cable 

410' (125 m)

         Extron R59, Belden 1505A cable 

350' (107 m)

      HD-SDI 

         Extron RG6, Belden 1694A cable 

650' (198 m)

         Extron R59, Belden 1505A cable 

550' (168 m)

      SDI 

         Extron RG6, Belden 1694A cable 

1230' (357 m)

         Extron R59, Belden 1505A cable 

1100' (335 m)

Digital video output SDI/HD-SDI/3G-SDI (FOX 320x Series with FOX I/O HD-SDI)

   Number/signal type 

16 single link SDI, HD-SDI, or 3G-SDI; or 8 dual link HD-SDI per board

   Connectors 

16 female BNC per board

   Nominal level 

0.80 Vp-p 10%

   Impedance 

75 ohms

   Return loss 

>11 dB @ 1 MHz to 1.3 GHz

   DC offset 

0 V with input at 0 offset

   Re-clocking 

Automatic, or use available bypass mode for nonstandard rates

   Jitter 

<0.2 UI

   Rise and fall time (20-80%) 

600 ps 200 ps

Control/remote switcher

   Serial control port 

1 bidirectional RS-232 or RS-422, female 9-pin D connector (rear panel)
1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel )

   Baud rate and protocol 

9600 to 115200 baud, 9600 baud (default), 8 data bits, 1 stop bit, no parity

   Serial control pin configurations

      9-pin female D connector 

RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+

      Mini stereo jack 

RS-232: tip = Tx, ring = Rx, sleeve = GND

   Ethernet control port 

1 female RJ-45 connector

   Ethernet data rate 

10/100Base-T, half/full duplex with autodetect

   Ethernet protocol 

ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, SNMP, Telnet

   Default settings 

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off

   Web server 

Up to 200 simultaneous sessions
7 MB nonvolatile user memory

   Program control 

Extron control/configuration program for Windows
Extron Simple Instruction Set (SIS)
Microsoft Internet Explorer ver. 6 or higher, Telnet

General

   Power supply 

Internal, 4* (positive-negative), primary and redundant, hot-swappable
Input: 100-240 VAC, 50-60 Hz
*Redundant power supplies are standard.

   Power consumption 

Enclosure without boards: 206 watts
Enclosure fully loaded with 20 MM boards: 640 watts
Enclosure fully loaded with 20 SM boards: 676 watts
Enclosure fully loaded with 20 SDI/HD-SDI boards: 734 watts
Each MM board: 21.7 watts
Each SM board: 23.5 watts
Each SDI/HD-SDI board: 26.2 watts

   Ambient temperature/humidity 

      FOX I/O 1616 HD-SDI 

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +104 F (0 to +40 C) / 10% to 90%, noncondensing

      All other boards and models 

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing

   Cooling 

Fans, right to left (as viewed from front panel)

   Thermal dissipation, full load 

2505 BTU/hr

   Mounting 

      Rack mount 

Yes

   Enclosure type  

Metal

   Enclosure dimensions 

29.75" H x 17.0" W x 12.25" D (17U high, full rack wide)
(75.6 cm H x 43.2 cm W x 31.1 cm D)
(Depth excludes connectors and handles.  Width excludes rack ears.)

   Product weight (fully loaded) 

113 lbs (51.3 kg)

   Shipping weight  

123 lbs (56 kg)

   Vibration  

ISTA 1A in carton (International Safe Transit Association)

   Regulatory compliance 

      Safety 

CE, c-UL, UL

      EMI/EMC 

CE, C-tick, FCC Class A, ICES, VCCI

   Product warranty 

3 years parts and labor