Welcome to Our Company
10G Pro AV Over IP Scaling Decoder - HDMI Ethernet and USB

10G Pro AV Over IP Scaling Decoder - HDMI Ethernet and USB

Product Details:

X

Product Description

Key Features
  • New Expanded AES67 capabilities enable any NAV encoder or decoder to transmit or receive an AES67 audio stream
  • New Confidence Preview available in the endpoint or NAVigator browser interface
  • NAV KVM Workstation supports eight displays per workstation to meet all your workstation needs
  • NAV KVM Workstation expanded to 30 presets for more flexible configurations
  • NAV KVM Focus is available to highlight the active display with any KVM switching method
  • NAV Pro AV over IP Workstation


specification

Frame rate2

24, 25, 30, 50, or 60 fps

Chroma sampling2

4:4:4, 4:2:2, or 4:2:0

Color bit depth2

8, or 10 bits per color

Signal Type

DVI v 1.0, HDMI v1.4 and v2.0, HDCP v1.4 and v2.3

Max. video data rate

18 Gbps (6 Gbps per color)

NOTE

14096 x 2160 @ 50-60 Hz is available only for HDMI connectors.


NOTE

2Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.




Video input stream

Number/signal type

1 PURE3 digital video over IP

Connector

1 SFP+ connector (SM or MM)


Video processing

Digital sampling

8 or 10 bits per color; 600 MHz pixel clock maximum

Compression

PURE3

Latency

<1 frame (encode/decode)

NOTE

Indicates minimum end-to-end latency. Network and video processing dependencies may apply.



Scaling

VectorTM


Video output

NOTE

Appropriate DVI-D to HDMI or DisplayPort to HDMI cables or adapters are required for DVI or DisplayPort signal output.



Number/signal type

1 digital HDMI video

Connectors

1 female HDMI type A

Resolution range

Up to 4K (4096x2160 at 60 Hz) and UHD (3840x2160 at 60 Hz)

Scaled resolution

640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008, 2048x12008, 2048x15368, 2056x10808, 2560x10808, 2560x14408, 2560x16008, bypass*
480p7,8, 576p6, 720p3,4,5,6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x1080 (2K)1,2,3,4,5,6,7,8
3840x21601,2,3,4,5,6,7,8, 4096x21601,2,3,4,5,6,7,8
1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz

NOTE

When the output resolution is set to "bypass," the input signal is output without scaling.



Standards

DVI v1.0, HDMI v1.4 and v2.0, HDCP v1.4/v2.3

Formats

RGB and YCbCr digital video


Audio

Gain

Analog to analog: -6.5dBu balanced, -12.5 dBu unbalanced
HDMI to analog: -5.3 dBu balanced, -11.3 dBu unbalanced

Frequency response

20 Hz to 20 kHz, +0.5 dB

THD + Noise

<0.1% @ 20 Hz to 20 kHz at nominal level

S/N

Analog to digital: >90 dB, at full scale output, unweighted
Digital to analog: >90 dB, at maximum balanced output, unweighted
Analog to analog: >90 dB, at maximum balanced output, unweighted

Crosstalk

<-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

Sampling Rates

48 kHz

Bit depths

24 bit


Audio input stream

Number/signal type

1 audio over IP LPCM or AES67

Connector

1 SFP+ connector (SM or MM)


Audio output

Number/signal type

1 analog stereo, unbalanced or balanced
1 digital stereo, de-embedded from HDMI

Connectors

(1) 3.5 mm captive screw connector, 5 pole
1 female HDMI (shared with video output)

Supported formats

LPCM (2 channel), analog stereo

Impedance

50 ohms unbalanced, 100 ohms balanced

Maximum level (Hi-Z)

>+15 dBu balanced, +9 dBu unbalanced

Gain error

+0.5 dB channel to channel

Gain range

Adjustable, -18 dB to +24 dB

Volume control range

-100 dB to 0 dB (control 0 to 100 in 1 dB steps)

NOTE

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu




Network interconnection (NAV)

Number/signal type

2 fiber optic

Connectors

(1) 10G SFP+ connector, 2 LC connectors

Termination

MDI (SFP+)

Ethernet standards

10 Gb Ethernet (802.3ae), 10GBase-LR (SFP+) SM, and 10GBase-SR (SFP+) MM

Protocols


Streaming

SRTP (AES-128) on video, audio, and USB

Transport

Multicast UDP

All supported

DHCP, HTTPS, IGMPv2/v3, IPv4, PTPv2, QoS, SSH, TCP, UDP

Security

AES-256, 802.1X, Active Directory authentication

Signal transmission distance


Singlemode

10 km (6.25 miles) with singlemode (SM) cables with 10GBASE-LR (SFP+)

Multimode

400 m (1312') with 50/125 m OM4 cables with 10GBase-SR (SFP+)

NOTE

Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.



Nominal peak wavelength

850 nm for multimode, 1310 nm for singlemode

Transmission power


Singlemode

-5.2 dBm, minimum

Multimode

-2.8 dBm, minimum

Maximum receiver sensitivity


Singlemode

-12.6 dBm, maximum

Multimode

-11.1 dBm, maximum

Optical loss budget


Singlemode

7.4 dB, maximum

Multimode

8.3 dB, maximum


Network extension (EXT)

Connector

1 RJ-45 female

Termination

Auto-MDIX, TIA/EIA T568B

Ethernet standards

1 GbE (802.3ab), 10/100/1000 Base-T, half/full duplex with auto-detect

Signal transmission distance

330' (100 m) using CAT-5e/6/6a/7 cables


USB extension (USB)

USB device port Host mode configuration


Number/signal type

1 USB 2.0 high speed

Connector

1 USB type C female

Power

N/A

Maximum built-in USB hubs

1

Minimum built-in USB hubs

0

Optional built-in USB hubs

1 (peripheral emulation enabled)

USB device port configuration Device mode configuration (default)


Number/signal type

1 USB 2.0 high speed

Connector

1 USB type C female

Power

5V DC, 500mA (when in device mode)

Maximum built-in USB hubs

0

Minimum built-in USB hubs

0

Optional built-in USB hubs

0

Host support

xHCI (USB 3.0), EHCI (USB 2.0), OHCI/UHCI (USB 1.1)

Data rates

Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)

Traffic types

Bulk, control, interrupt, and isochronous

Network switch hops

5 hops (typical)

NOTE

Network switch hop limitations may apply. Typical limit is up to five network switches.




Communications - external devices

Serial


Quantity/type

1 bidirectional RS-232

Connector

(1) 3.5 mm captive screw connector, 5 pole (shared with IR port)

Baud rate and protocol

300 to 115200 baud (9600 baud = default)
8 (default) or 7 data bits
1 (default) or 2 stop bits
no parity (default), even or odd parity

Pin configuration

Tx, Rx, and Gnd

IR control


Quantity/type

1 TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz

Connector

(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232)

Pin configuration

S = signal and G = Gnd

IR output carrier frequency

30 kHz to 300 kHz

CEC control

1 HDMI type A connector

USB configuration port


Quantity/type

1 front panel USB mini-B

Standard

Ethernet over USB


General

Power supply

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 2.0 A, 24 watts

Power consumption


Device

22.9 watts

Device and power supply

25.8 watts

Ambient temperature/humidity

Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing
Operating: +32 to +104 F (0 to +40 C) / 10% to 85%, noncondensing

Cooling

Fan, air flows from top to rear

Thermal dissipation


Device

68.8 BTU/hr

Device and power supply

78.7 BTU/hr

Mounting


Rack mount

Yes, with optional rack shelf

Furniture mount

Yes, with optional under desk mounting kit

Enclosure type

Metal

Enclosure

1.00" H x 8.75" W x 6.00" D (half rack wide)
(25 mm H x 222 mm W x 152 mm D)

Product weight

1.5 lbs (0.68 kg)

Regulatory compliance

CE, c-UL UL,C-tick, FCC Class A, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor


Enter Buying Requirement Details
Email Id
Mobile number


Back to top