10G Pro AV Over IP Encoder-HDMI And Ethernet-Decorator-Style Wallplate

specification

   Frame rate2 

24, 25, 30, 50, or 60 fps

   Chroma sampling2 

4:4:4, 4:2:2, or 4:2:0

   Color bit depth2 

8, or 10 bits per color

   Signal Type 

DVI v1.0, HDMI v1.4 and v2.0, HDCP v1.4 and v2.3

   Max. video data rate 

18 Gbps (6 Gbps per color)

Video input and loop through

   Number/signal type 

1 digital HDMI video*
1 digital HDMI video (loop through)

   Connectors 

2 female HDMI type A: 1 for input, 1 for loop through

   Resolution range 

Up to 4K (4096x2160 at 60 Hz) and UHD (3840x2160 at 60 Hz)

   Standards 

DVI v1.0, HDMI v1.4 and v2.0, HDCP v1.4/v2.3

Video processing

   Digital sampling 

8 or 10 bits per color; 600 MHz pixel clock maximum

   Compression 

PURE3®

   Bit rate 

250 Mbps to 900 Mbps

   Latency 

<1 frame (encode/decode)**

Video output stream

   Number/signal type 

1 PURE3 digital video over IP

   Connector 

1 RJ-45 connector

Audio

   Sampling Rates 

32, 44.1, 48 kHz

   Bit depths 

16, 20, 24 bit

Audio input

   Number/signal type 

1 digital stereo, de-embedded from HDMI

   Connectors 

1 female HDMI type A (shared with video input)

   Supported formats 

LPCM (2 channel)

Audio output stream

   Number/signal type 

1 audio over IP LPCM
1 audio over IP AES67*

   Connector 

1 RJ-45 connector

Network interconnection (NAV)

   Connector type 

1 RJ-45

   Ethernet standards 

1GbE (802.3ab), 10/100/1000 Base-T, half/full duplex with autodetect

   Termination 

Auto-MDIX, TIA/EIA T568B

   Power over Ethernet (PoE) 

Complies with IEEE 802.3at Type 2 (PoE+), class 4

   Protocols 

      Streaming 

SRTP (AES-128) on video and audio

      Transport 

Multicast UDP

      All supported 

DHCP, HTTPS, IGMPv2/v3, IPv4, PTPv2, QoS, SSH, TCP, UDP

   Security 

AES-256, 802.1X, Active Directory authentication

   Signal transmission distance 

330' (100 m) using CAT 5e/6/6a/7 cables

Network extension (EXT)

   Connector 

1 RJ-45 female

   Termination 

Auto-MDIX, TIA/EIA T568B

   Ethernet standards 

1Gbe, (802,3ab), 10/100/1000 Base-T, half/full duplex with autodetect

   Signal transmission distance 

330' (100 m) using CAT-5e/6/6a/7 cables

Communications - external devices

   Serial 

      Quantity/type 

1 bidirectional RS-232

      Connector 

(1) 3.5 mm captive screw connector, 5 pole (shared with IR port)

      Baud rate and protocol 

300 to 115200 baud (9600 baud = default)
8 (default) or 7 data bits
1 (default) or 2 stop bits
no parity (default), even or odd parity

      Pin configuration 

Tx, Rx, and Gnd

   IR control 

      Quantity/type 

1 TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz

      Connector 

(1) 3.5 mm captive screw connector, 5-pole (shared with RS-232)

      Pin configuration 

S = signal and G = Gnd

      IR output carrier frequency 

30 kHz to 300 kHz

   USB configuration port 

      Quantity/type 

1 front panel USB mini-B

      Standard 

Ethernet over USB

General

   Power supply 

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 2.0 A, 24 watts

   Power consumption 

      Device  

20.1 watts

      Device and power supply  

22.9 watts

      PoE 

Complies with IEEE 802.3at Type 2 (PoE+), class 4

   Ambient temperature/humidity 

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 85%, noncondensing

   Cooling 

Fan, air flows from bottom to top

   Thermal dissipation 

      Device  

67.7 BTU/hour

      Device and power supply  

77.2 BTU/hour

      Device with PoE 

77.7 BTU/hour

   Mounting 

      Rack mount 

No

      Furniture or wall mount 

Yes, in a standard US 3-gang electrical junction box or mud ring.

   Enclosure type  

Metal

   Enclosure 

      Faceplate 

4.5" H x 6.4" W x 0.72" D (11.4 cm H x 16.3 cm W x 1.82 cm D)

      Device  

2.72" H1 x 5.29" W x 1.81" D2 (6.9 cm H1 x 13.4 cm W x 4.6 cm D2)